Trails Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Yellow: Cut FOUR (4) 3 1/2″ squares. (ONE (1) of these is the lower left-hand corner of this quilt block. Another ONE (1) is the upper right-hand corner of this quilt block. The remaining TWO (2) of these are paired with the Brown 3 1/2″ triangles, which will create ONE (1) Four-Patch, which is the center of this quilt block as needed to sew it together.)
• Brown: Cut FOUR (4) 3 1/2″ squares. (ONE (1) of these is the lower right-hand corner of this quilt block. Another ONE (1) is the upper left-hand corner of this quilt block. The remaining TWO (2) of these are paired with the Yellow 3 1/2″ triangles, which will create ONE (1) Four-Patch, which is the center of this quilt block as needed to sew it together.)
• Orange: Cut ONE (1) 5 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles. (These triangles are flanked by the results of the White 3 7/8″ squares, which will create FOUR (4) Flying Geese, as needed to sew this quilt block together.)
• White: Cut FOUR (4) 3 7/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. (These resulting triangles will flank the resulting triangles of the Orange 5 1/4″ square, which will create FOUR (4) Flying Geese, as needed to sew this quilt block together.)

Trails Quilt Block Diagram

Trails Quilt

Sew TWELVE (12) “Trails Quilt Blocks” to end up with the quilt top pictured above. The size will be 36″ x 48″ finished & 36 1/2″ x 48 1/2″ unfinished.

Tasty Trail Mix is a Free Recipe by Cecelia Dardanes from Cecelia’s Good Stuff!

Pineapple Plant Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Yellow: Cut ONE (1) 3 1/2″ x 6 7/8″ rectangle. (This is paired with a White 3 1/2″ square, which will create ONE (1) Snowball Corner, as needed to sew this quilt block together.)
• Dk. Green: Cut ONE (1) 3 7/8″ square. (This is paired with the White 3 7/8″ square, which will create TWO (2) Half-Square Triangles. There’s only ONE (1) of these Half-Square Triangles in this quilt block.)
• Dk. Green: Cut ONE (1) 3 1/2″ x 9 7/8″ rectangle. (This is paired with a White 3 1/2″ square, which will create ONE (1) Snowball Corner, as needed to sew this quilt block together.)
• Green: Cut ONE (1) 3 1/2″ x 6 7/8″ rectangle. (This is paired with a White 3 1/2″ square, which will create ONE (1) Snowball Corner, as needed to sew this quilt block together.)
• Green: Cut ONE (1) 3 1/2″ x 9 7/8″ rectangle. (This is paired with a White 3 1/2″ square, which will create ONE (1) Snowball Corner, as needed to sew this quilt block together.)
• Green: Cut ONE (1) 3 1/2″ x 12 3/8″ rectangle. (This is paired with a White 3 1/2″ square, which will create ONE (1) Snowball Corner, as needed to sew this quilt block together.)
• White: Cut ONE (1) 3 7/8″ square. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time. (This is paired with the Dk. Green 3 7/8″ square, which will create TWO (2) Half-Square Triangles. There’s only ONE (1) of these Half-Square Triangles in this quilt block.)
• White: Cut ONE (1) 3 1/2″ square. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time. (This is paired with the Yellow 3 1/2″ x 6 7/8″ rectangle, which will create ONE (1) Snowball Corner, as needed to sew this quilt block together.)
• White: Cut ONE (1) 3 1/2″ square. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time. (This is paired with the Dk. Green 3 1/2″ x 9 7/8″ rectangle, which will create ONE (1) Snowball Corner, as needed to sew this quilt block together.)
• White: Cut ONE (1) 3 1/2″ square. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time. (This is paired with the Green 3 1/2″ x 6 7/8″ rectangle, which will create ONE (1) Snowball Corner, as needed to sew this quilt block together.)
• White: Cut ONE (1) 3 1/2″ square. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time. (This is paired with the Green 3 1/2″ x 9 7/8″ rectangle, which will create ONE (1) Snowball Corner, as needed to sew this quilt block together.)
• White: Cut ONE (1) 3 1/2″ square. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time. (This is paired with the Green 3 1/2″ 12 3/8″ rectangle, which will create ONE (1) Snowball Corner, as needed to sew this quilt block together.)
• White: Cut ONE (1) 3 1/2″ square. (This is the upper left-hand corner of this quilt block as needed to sew it together.)

Pineapple Plant Quilt Block Diagram

Pineapple Plant Quilt

Sew TWELVE (12) “Pineapple Plant Quilt Blocks” to end up with the quilt top pictured above. The size will be 36″ x 48″ finished & 36 1/2″ x 48 1/2″ unfinished.

Pineapple BBQ Chickpeas is a Free Recipe by Catherine from Plant Based RD!