On Cloud Nine Bonus! Pathways Quilt Block!
Pathways Quilt Block
Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):
- Peach: Cut TWO (2) 5 3/8″ squares. (These are paired with the White 5 3/8″ squares which will create FOUR (4) Half-Square Triangles. They’ll also be the FOUR (4) corners of this quilt block when it’s sewn together.)
- White: Cut TWO (2) 5 3/8″ squares. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time. (These are paired with the Peach 5 3/8″ squares which will create FOUR (4) Half-Square Triangles. They’ll also be the FOUR (4) corners of this quilt block when it’s sewn together.)
- Rust: Cut FIVE (5) 1 1/2″ squares. (These are paired with the Gray 1 1/2″ squares which will create ONE (1) Nine-Patch. All together they’ll create the center of this quilt block.)
- Rust: Cut FOUR (4) 1 1/2″ x 5″ rectangles. (These are paired with the Gray 1 1/2″ x 5″ rectangles as needed to sew this quilt block together.)
- Gray: Cut FOUR (4) 1 1/2″ squares. (These are paired with the Rust 1 1/2″ squares which will create ONE (1) Nine-Patch. All together they’ll create the center of this quilt block.)
- Gray: Cut EIGHT (8) 1 1/2″ x 5″ rectangles. (These are paired with the Rust 1 1/2″ x 5″ rectangles as needed to sew this quilt block together.)
Pathways Quilt Block Diagram
The best way to sew this quilt block together is to star with the special elements together first (Half-Square Triangles & the Nine-Patch). Then sew the FOUR (4) rectangles together. Next sew the upper THREE (3) sections together, same goes for the center section & the bottom section. Finally sew all THREE (3) sections to each other!
Pathways Quilt
Sew TWELVE (12) “Pathways Quilt Blocks” to end up with the quilt top pictured above. The size will be 36″ x 48″ finished & 36 1/2″ x 48 1/2″ unfinished.
Star Power: Patchwork Star Quilt Block & Patchwork Star Variation Quilt Block
Patchwork Star Quilt Block
Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):
- Purple: Cut TWO (2) 2 1/2″ squares. (These squares are the lower left-hand & the upper right-hand corners of this quilt block.)
- Purple: Cut TWO (2) 2 7/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. Will yield TWO (2) triangles per square. (These triangles are paired with the results of the White 3 1/4″ squares, which will create FOUR (4) Flying Geese, as needed to sew this quilt block together.)
- Purple: Cut ONE (1) 3 1/4″ square. Then cut the squares diagonally, corner-to-corner, TWO (2) times. Will yield FOUR (4) triangles per square. (These triangles are paired with the White
2 1/2″ squares in the upper left-hand & lower right-hand corners of this quilt block. They’re also paired with the Purple/White Flying Geese as needed to sew this quilt block together.) - Pink: Cut TWO (2) 2 1/2″ squares. (These squares are flanked by the results of the White 3 1/4″ squares, which will create TWO (2) Square in a Squares, as needed to sew this quilt block together.)
- Pink: Cut ONE (1) 2 7/8″ square. Then cut the squares diagonally, corner-to-corner, ONE (1) time. Will yield TWO (2) triangles per square. (These triangles are flanked by the results of the White 3 1/4″ square, which will create TWO (2) Flying Geese, as needed to sew this quilt block together.)
- Yellow: Cut TWO (2) 2 1/2″ squares. (These are paired with the results of the White 2 7/8″ squares which will create the center of this quilt block. Then they’re flanked by the results of the White 3 1/4″ squares as needed to sew this quilt block together.)
- Yellow: Cut FOUR (4) 3 3/8″ squares. (These are flanked by the results of the White 5 1/4″ squares, which will create TWO (2) Square in a Squares, as needed to sew this quilt block together.)
- White: Cut TWO (2) 2 1/2″ squares. (These are the upper left-hand & the lower right-hand corners of this quilt block.
- White: Cut ONE (1) 3 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. Will yield FOUR (4) triangles. (These triangles are paired with the results of the Purple
2 7/8″ squares, which will create FOUR (4) Flying Geese, as needed to sew this quilt block together.) - White: Cut TWO (2) 3 1/4″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. Will yield FOUR (4) triangles per square. (These triangles are paired with the Pink
3 3/8″ squares, which will create TWO (2) Square in a Squares, as needed to sew this quilt block together.) - White: Cut ONE (1) 3 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. Will yield FOUR (4) triangles. (These triangles are paired with the results of the Pink
2 7/8″ squares, which will create TWO (2) Flying Geese, as needed to sew this quilt block together.) - White: Cut TWO (2) 3 1/4″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. Will yield FOUR (4) triangles per square. (These triangles are paired with the Yellow 3 3/8″ squares as needed to sew this quilt block together.)
Patchwork Star Quilt Block Diagram
The best way to sew this quilt block together is on the diagonal. Sew all of the Flying Geese & Square in a Square elements together first. Then sew either ONE of the center strips together (from one end to another). Next sew the TWO (2) remaining corners together. Finally sew the TWO (2) remaining corners to the center strip!
Patchwork Star Variation Quilt
Sew TWELVE (12) “Patchwork Star Variation Quilt Blocks” to end up with the quilt top pictured above. The size will be 36″ x 48″ finished & 36 1/2″ x 48 1/2″ unfinished.
Patchwork Star Variation Quilt Block
Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):
- Lt. Blue: Cut TWO (2) 2 1/2″ squares. (These are flanked by the results of the White 3 1/4″ squares which will create TWO (2) Square in a Squares. They’re also the center of this quilt block.)
- Lt. Blue: Cut TWO (2) 4 3/8″ squares. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time. (These are paired with the Pink 4 3/8″ squares, which will create FOUR (4) Half-Square Triangles, as needed to sew this quilt block together.)
- Pink: Cut TWO (2) 3 3/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. Will yield TWO (2) triangles per square. (These triangles are flanked by the results of the White 3 1/4″ squares, which will create FOUR (4) Flying Geese, as needed to sew this quilt block together.)
- Pink: Cut TWO (2) 4 3/8″ squares. (These are paired with the Lt. Blue 4 3/8″ squares, which will create FOUR (4) Half-Square Triangles, as needed to sew this quilt block together.)
- Orange: Cut TWO (2) 2 1/2″ squares. (These are flanked by the results of the White 3 1/4″ squares, which will create TWO (2) Square in a Squares, as needed to sew this quilt block together.)
- Orange: Cut TWO (2) 2 3/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. Will yield TWO (2) triangles per square. (These triangles are flanked by the results of the White 3 1/4″ squares, which will create FOUR (4) Flying Geese, as needed for this quilt block.)
- Orange: Cut FOUR (4) 2 3/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. Will yield TWO (2) triangles per square. (These triangles are paired with the White 2 1/2″ squares in the corners of this quilt block.)
- White: Cut TWO (2) 2 1/2″ squares. (These are the upper left-hand & the lower right-hand corners of this quilt block.
- White: Cut ONE (1) 3 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. Will yield FOUR (4) triangles. (These triangles are paired with the results of the Pink
2 7/8″ squares, which will create FOUR (4) Flying Geese, as needed to sew this quilt block together.) - White: Cut TWO (2) 3 1/4″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. Will yield FOUR (4) triangles per square. (These triangles are paired with the Orange 3 3/8″ squares, which will create TWO (2) Square in a Squares, as needed to sew this quilt block together.)
- White: Cut TWO (2) 3 1/4″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. Will yield FOUR (4) triangles per square. (These triangles are paired with the Orange 3 3/8″ squares, which will create TWO (2) Square in a Squares, as needed to sew this quilt block together.)
- White: Cut TWO (2) 3 1/4″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. Will yield FOUR (4) triangles per square. (These triangles are paired with the Lt. Blue 3 3/8″ squares as needed to sew this quilt block together.)
Patchwork Star Variation Quilt Block Diagram
The best way to sew this quilt block together is on the diagonal. Sew all of the Flying Geese, Half-Square Triangles & Square in a Square elements together first. Then sew either ONE of the center strips together (from one end to another). Next sew the TWO (2) remaining corners together. Finally sew the TWO (2) remaining corners to the center strip!
Patchwork Star Variation Quilt
Sew TWELVE (12) “Patchwork Star Variation Quilt Blocks” to end up with the quilt top pictured above. The size will be 36″ x 48″ finished & 36 1/2″ x 48 1/2″ unfinished.
On Cloud Nine: Double L Quilt Block Tutorial
Double L Quilt Block
Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):
- Pink: Cut FOUR (4) 2 1/2″ squares. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time.
- Pink: Cut FOUR (4) 2 1/2″ x 4 1/2″ rectangles.
- Brown: Cut TWO (2) 4 7/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. Will yield TWO (2) triangles per square. (These are the FOUR (4) corners of this quilt block.)
- Brown: Cut ONE (1) 2 1/2″ x 4 1/2″ rectangle.
- Brown: Cut TWO (2) 2 1/2″ x 6 1/2″ rectangles.
- Brown: Cut ONE (1) 2 1/2″ x 8 1/2″ rectangle.
- White: Cut FOUR (4) 2 1/2″ squares. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time.
- White: Cut FOUR (4) 2 1/2″ squares.
Double L Quilt Block Diagram
Sew the Snowball Corners for the Entire Quilt Block together first.
Then follow the rectangles below to sew the rest of the quilt block together. The upper right-hand & the lower left-hand sections are the same. So are the upper right-hand & the lower left-hand sections:
-
- Part #1 – Upper Left-Hand Corner
-
- Part #2 – Lower Left-Hand Corner
-
- Part #3 – Upper Right-Hand Corner
-
- Part #4 – Lower Left-Hand Corner
Next sew the left-hand side together followed by the right-hand side.
Finally sew the center of the quilt block together!
Double L Quilt
Sew TWELVE (12) “Double L Quilt Blocks” to end up with the quilt top pictured above. The size will be 36″ x 48″ finished & 36 1/2″ x 48 1/2″ unfinished.
Quilted Kitchen: Halloween Pumpkin Quilt Block & Halloween Pumpkin Bars Recipe
Halloween Pumpkin Quilt Block
Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):
- Green: Cut ONE (1) 1″ square. (This is the “stem” of the “Pumpkin.” It’s paired with the Green/Yellow Snowball Corner as needed to sew this quilt block together.)
- Green: Cut ONE (1) 1″ square. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time. (This square is paired with the Yellow 1″ square, which will create ONE (1) Snowball Corner, as needed to sew the “stem” of the “Pumpkin” together.)
- Yellow: Cut ONE (1) 1″ square. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time. (This square is paired with the Green 1″ square, which will create ONE (1) Snowball Corner, as needed to sew the “stem” of the “Pumpkin” together.)
- Yellow: Cut FOUR (4) 1 7/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. Will yield TWO (2) triangles per square. (These triangles will flank the results of the Orange 2 3/4″ squares, which will create FOUR (4) Flying Geese, as needed to sew this quilt block together.)
- Yellow: Cut TWO (2) 1 3/4″ squares. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time. (These are paired with the left & right bottom corners of the Orange 6 1/2″ x 12 1/2″ rectangle. Which will create TWO (2) Snowball Corners as needed to sew this quilt block together.
- Yellow: Cut TWO (2) 1 1/2″ x 3 1/4″ rectangles. (These are paired with the Green 1″ square & the Green/Yellow Half-Square Triangle–the “Stem” of the “Pumpkin”–as needed to sew it together. They’re also the upper left-hand & the upper right-hand corners of this quilt block.)
- Orange: Cut ONE (1) 1 3/4″ x 7 1/4″ rectangle. (This is paired with the Yellow 1 3/4″ squares which will create TWO (2) Snowball Corners. It’s the “Lid” of the “Pumpkin” as needed to sew it together.)
- Orange: Cut ONE (1) 2 3/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. Will yield FOUR (4) triangles. (These triangles are flanked by the results of the Yellow 1 5/8″ squares, which will create FOUR (4) Flying Geese, as needed to sew this quilt block together.)
- Orange: Cut ONE (1) 6 1/2″ x 12 1/2″ rectangle. (This is paired with the Yellow 1 7/8″ squares which will create TWO (2) Snowball Corners. It’s also paired with the results of the Orange
2 3/4″ squares as needed to sew this quilt block together.)
Halloween Pumpkin Quilt Block Diagram
Halloween Pumpkin Quilt
Sew TWELVE (12) “Halloween Pumpkin Quilt Blocks” to end up with the quilt top pictured above. The size will be 36″ x 48″ finished & 36 1/2″ x 48 1/2″ unfinished.
Halloween Pumpkin Bars is a Free Recipe by Karla Johnson from Taste of Home!