Domino Star Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Blue: Cut SIXTEEN (16) 1 7/8″ squares. (These are paired with the White 1 7/8″ squares as needed to sew this quilt block together.)
• Tan: Cut ONE (1) 3 3/8″ square. (This is the center of this quilt block. It’s paired with the FOUR (4) Flying Geese.)
• Tan: Cut FOUR (4) 3 3/8″ squares. (These are paired on ONE (1) side with the White 2 7/8″ squares which will create FIVE (5) Snowball Corners. They’re also paired with the White 1 7/8″ x 3 3/8″ rectangles as needed to sew this quilt block together.)
• Tan: Cut TWO (2) 3 1/4″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles per square. (These will flank the results of the White 2 7/8″ squares, which will create FOUR (4) Flying Geese, as needed to sew this quilt block together.)
• White: Cut EIGHT (8) 1 7/8″ squares. (These are paired with the Blue 1 7/8″ squares as needed to sew this quilt block together.)
• White: Cut FOUR (4) 2 3/8″ squares. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time. (These are paired with the Tan 3 3/8″ squares which will create FOUR (4) Snowball Corners. They’ll also be the FOUR (4) corners of this quilt block.)
• White: Cut TWO (2) 2 3/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. These are flanked by the results of the Tan 3 1/4″ square, which will create FOUR (4) Flying Geese, as needed to sew this quilt block together.)
• White: Cut THREE (3) 3 1/4″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles per square. (These will flank the Blue 1 7/8″ squares as needed to sew this quilt block together.)
• White: Cut FOUR (4) 1 7/8″ x 3 3/8″ rectangles. (These are paired on ONE (1) side with the Tan 3 3/8″ squares & they’re also paired on ONE (1) other side by the White/Tan Flying Geese. All are needed to sew this quilt block together.)

Domino Star Quilt Block Diagram

Domino Star Quilt

If you sew TWELVE (12) “Domino Star Quilt Blocks” you’ll end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.

Domino Star Variation Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Blue: Cut SIXTEEN (16) 1 7/8″ squares. (These are paired with the White 1 7/8″ squares as needed to sew this quilt block together.)
• Blue: Cut ONE (1) 3 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles. (These will flank the Tan 2 1/2″ square, which will create ONE (1) Square in a Square, as needed to sew this quilt block together.)
• Blue: Cut SIXTEEN (16) 1 7/8″ squares. (These are paired with the White 1 7/8″ squares as needed to sew this quilt block together.)
• Tan: Cut ONE (1) 2 1/2″ square. (This is the center of this quilt block. It’s flanked by the results of the Blue 3 1/4″ square, which will create ONE (1) Snowball Corner, as needed to sew this quilt block together.)
• Tan: Cut FOUR (4) 3 3/8″ squares. (These are paired on ONE (1) side with the White 2 7/8″ squares which will create FIVE (5) Snowball Corners. They’re also paired with the White 1 7/8″ x 3 3/8″ rectangles as needed to sew this quilt block together.)
• Tan: Cut TWO (2) 3 1/4″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles per square. (These will flank the results of the White 2 7/8″ squares, which will create FOUR (4) Flying Geese, as needed to sew this quilt block together.)
• White: Cut EIGHT (8) 1 7/8″ squares. (These are paired with the Blue 1 7/8″ squares as needed to sew this quilt block together.)
• White: Cut FOUR (4) 2 3/8″ squares. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time. (These are paired with the Tan 3 3/8″ squares which will create FOUR (4) Snowball Corners. They’ll also be the FOUR (4) corners of this quilt block.)
• White: Cut TWO (2) 2 3/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. These are flanked by the results of the Tan 3 1/4″ square, which will create FOUR (4) Flying Geese, as needed to sew this quilt block together.)
• White: Cut THREE (3) 3 1/4″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles per square. (These will flank the Blue 1 7/8″ squares as needed to sew this quilt block together.)
• White: Cut FOUR (4) 1 7/8″ x 3 3/8″ rectangles. (These are paired on ONE (1) side with the Tan 3 3/8″ squares & they’re also paired on ONE (1) other side by the White/Tan Flying Geese. All are needed to sew this quilt block together.)

Domino Star Variation Quilt Block Diagram

Domino Star Variation Quilt

Rosette Star Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Lt. Pink: Cut FOUR (4) 2 5/8″ squares. (These squares are paired with the results of the Bright Pink 4 1/4″ squares as needed to sew this quilt block together.)
• Lt. Pink: Cut ONE (1) 4 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles. (These triangles are paired with the results of the Bright Pink 4 1/4″ squares & they’re also paired with the results of the Bright Pink 3 7/8″ squares. All are needed to sew this quilt block together.)
• Bright Pink: Cut TWO (2) 4 1/4″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles per square. (These triangles will flank the White 3 1/2″ corner squares. They’re also paired with the Lt. Pink 2 5/8″ squares & they’re paired with the results of the Lt. Pink 4 1/4″ square. All are needed to sew this quilt block together.)
• Bright Pink: Cut ONE (1) 4 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles. (These triangles are paired with the Lt. Pink 2 5/8″ squares. They’re also paired with the results of the Bright Pink 3 7/8″ squares. They’ll also help create the center of this quilt block when it’s sewn together.)
• Bright Pink: Cut TWO (2) 3 7/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. (These triangles are paired with the Lt. Pink 2 3/8″ squares. They’re also paired with the results of the Bright Pink 4 1/4″ square. In addition they’re paired with the results of the Lt. Pink 4 1/4″ square. They’ll also help create the center of this quilt block when this quilt block is sewn together.)
• White: Cut ONE (1) 7 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles. (These are flanked by the results of the Bright Pink 4 1/4″ squares. They’re also flanked by the results of the Lt. Pink 4 1/4″ square. In addition they’re flanked by the Lt. Pink 2 3/8″ squares. All are needed to sew this quilt block together.)
• White: Cut FOUR (4) 3 1/2″ squares. (These are the FOUR (4) corners of this quilt block. They’re flanked by the results of the Bright Pink 4 1/4″ squares.)

Rosette Star Quilt Block Diagram

Rosette Star Quilt

If you sew TWELVE (12) “Rosette Star Quilt Blocks” you’ll end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.

Rosette Star Variation Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Bright Pink: Cut FOUR (4) 2 5/8″ squares. (These squares are paired with the results of the Lt. Pink 4 1/4″ squares as needed to sew this quilt block together.)
• Bright Pink: Cut ONE (1) 4 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles. (These triangles are paired with the results of the Lt. Pink 4 1/4″ squares & they’re also paired with the results of the Lt. Pink 3 7/8″ squares. All are needed to sew this quilt block together.)
• Bright Pink: Cut TWO (2) 3 7/8″ squares. (These are paired with the White 3 7/8″ squares which will create FOUR (4) Half-Square Triangles. They’ll also be the FOUR (4) corners of this quilt block when it’s sewn together.)
• Lt. Pink: Cut TWO (2) 4 1/4″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles per square. (These triangles will flank the White 3 1/2″ corner squares. They’re also paired with the Bright Pink 2 5/8″ squares & they’re paired with the results of the Bright Pink 4 1/4″ square. All are needed to sew this quilt block together.)
• Lt. Pink: Cut ONE (1) 4 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles. (These triangles are paired with the Bright Pink 2 5/8″ squares. They’re also paired with the results of the Lt. Pink 3 7/8″ squares. They’ll also help create the center of this quilt block when it’s sewn together.)
• Lt. Pink: Cut TWO (2) 3 7/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. (These triangles are paired with the Bright Pink 2 3/8″ squares. They’re also paired with the results of the Bright Pink 4 1/4″ square. In addition they’re paired with the results of the Lt. Pink 4 1/4″ square. They’ll also help create the center of this quilt block when it’s sewn it together.)
• White: Cut ONE (1) 7 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles. (These are flanked by the results of the Lt. Pink
  4 1/4″ squares. They’re also flanked by the results of the Bright Pink 4 1/4″ square. In addition they’re flanked by the Bright Pink 2 3/8″ squares. All are needed to sew this quilt block together.)
• White: Cut TWO (2) 3 7/8″ squares. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time. (These are paired with the Bright Pink 3 7/8″ squares which will create FOUR (4) Half-Square Triangles. They’ll also be the FOUR (4) corners of this quilt block.)

Rosette Star Variation Quilt Block Diagram

Rosette Star Variation Quilt

If you sew TWELVE (12) “Rosette Star Variation Quilt Blocks” you’ll end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.

Margaret’s Star Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Yellow: Cut TWO (2) 3 7/8″ squares. (These are paired with the White 3 7/8″ squares, which will create FOUR (4) Half-Squared Triangles, as needed to sew this quilt block together.)
• Yellow: Cut TWO (2) 3 7/8″ squares. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time. (These are paired with the Purple 3 7/8″ squares, which will create FOUR (4) Half-Square Triangles, as needed to sew this quilt block together.)
• Purple: Cut TWO (2) 3 7/8″ squares. (These are paired with the Yellow 3 7/8″ squares, which will create FOUR (4) Half-Square Triangles, as needed to sew this quilt block together.)
• Purple: Cut TWO (2) 3 7/8″ squares. (These are paired with the White 3 7/8″ squares which will create FOUR (4) Half-Square Triangles. They’ll also be the FOUR (4) corners of this quilt block.)
• Purple: Cut TWO (2) 3 7/8″ squares. (These are paired with the White 3 7/8″ squares which will create FOUR (4) Half-Square Triangles. Once these FOUR (4) Half-Square Triangles are sewn together they’ll create the center of this quilt block.)
• White: Cut TWO (2) 3 7/8″ squares. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time. (These are paired with the Yellow 3 7/8″ squares, which will create FOUR (4) Half-Squared Triangles, as needed to sew this quilt block together.)
• White: Cut TWO (2) 3 7/8″ squares. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time. (These are paired with the Purple 3 7/8″ squares, which will create FOUR (4) Half-Squared Triangles. They’ll also be the FOUR (4) corners of this quilt block.)
• White: Cut TWO (2) 3 7/8″ squares. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time. (These are paired with the Purple 3 7/8″ squares which will create FOUR (4) Half-Square Triangles. Once these FOUR (4) Half-Square Triangles are sewn together they’ll create the center of this quilt block.)

Margaret’s Star Quilt Block Diagram

Margaret’s Star Quilt

If you sew TWELVE (12) “Margaret’s Star Quilt Blocks” you’ll end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.

Margaret’s Star Variation Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Green: Cut TWO (2) 3 7/8″ squares. (These are paired with the White 3 7/8″ squares which will create FOUR (4) Half-Square Triangles. They’ll also be the FOUR (4) corners of this quilt block.)
• Green: Cut TWO (2) 3 7/8″ squares. (These are paired with the White 3 7/8″ squares which will create FOUR (4) Half-Square Triangles. When all FOUR (4) of these Half-Square Triangles are sewn together they’ll create the center of this quilt block.)
• Blue: Cut FOUR (4) 3 7/8″ squares. Then cut the square diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles. (These will flank the results of the White 7 1/4″ square, which will create FOUR (4) Flying Geese, as needed when this quilt block is sewn together.)
• White: Cut TWO (2) 3 7/8″ squares. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time. (These are paired with the Green 3 7/8″ squares which will create FOUR (4) Half-Square Triangles. They’ll also be the FOUR (4) corners of this quilt block.)
• White: Cut TWO (2) 3 7/8″ squares. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time. (These are paired with the Green 3 7/8″ squares which will create FOUR (4) Half-Square Triangles. When all FOUR (4) of these Half-Square Triangles are sewn together they’ll create the center of this quilt block.)
• White: Cut ONE (1) 7 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles. (These are flanked by the results of the Blue 3 7/8″ squares, which will create FOUR (4) Flying Geese, as needed when this quilt block is sewn together.)

Margaret’s Star Variation Quilt Block Diagram

Margaret’s Star Variation Quilt

If you sew TWELVE (12) “Margaret’s Star Variation Quilt Blocks” you’ll end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.