Domino Star Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Blue: Cut SIXTEEN (16) 1 7/8″ squares. (These are paired with the White 1 7/8″ squares as needed to sew this quilt block together.)
• Tan: Cut ONE (1) 3 3/8″ square. (This is the center of this quilt block. It’s paired with the FOUR (4) Flying Geese.)
• Tan: Cut FOUR (4) 3 3/8″ squares. (These are paired on ONE (1) side with the White 2 7/8″ squares which will create FIVE (5) Snowball Corners. They’re also paired with the White 1 7/8″ x 3 3/8″ rectangles as needed to sew this quilt block together.)
• Tan: Cut TWO (2) 3 1/4″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles per square. (These will flank the results of the White 2 7/8″ squares, which will create FOUR (4) Flying Geese, as needed to sew this quilt block together.)
• White: Cut EIGHT (8) 1 7/8″ squares. (These are paired with the Blue 1 7/8″ squares as needed to sew this quilt block together.)
• White: Cut FOUR (4) 2 3/8″ squares. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time. (These are paired with the Tan 3 3/8″ squares which will create FOUR (4) Snowball Corners. They’ll also be the FOUR (4) corners of this quilt block.)
• White: Cut TWO (2) 2 3/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. These are flanked by the results of the Tan 3 1/4″ square, which will create FOUR (4) Flying Geese, as needed to sew this quilt block together.)
• White: Cut THREE (3) 3 1/4″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles per square. (These will flank the Blue 1 7/8″ squares as needed to sew this quilt block together.)
• White: Cut FOUR (4) 1 7/8″ x 3 3/8″ rectangles. (These are paired on ONE (1) side with the Tan 3 3/8″ squares & they’re also paired on ONE (1) other side by the White/Tan Flying Geese. All are needed to sew this quilt block together.)

Domino Star Quilt Block Diagram

Domino Star Quilt

If you sew TWELVE (12) “Domino Star Quilt Blocks” you’ll end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.

Domino Star Variation Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Blue: Cut SIXTEEN (16) 1 7/8″ squares. (These are paired with the White 1 7/8″ squares as needed to sew this quilt block together.)
• Blue: Cut ONE (1) 3 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles. (These will flank the Tan 2 1/2″ square, which will create ONE (1) Square in a Square, as needed to sew this quilt block together.)
• Blue: Cut SIXTEEN (16) 1 7/8″ squares. (These are paired with the White 1 7/8″ squares as needed to sew this quilt block together.)
• Tan: Cut ONE (1) 2 1/2″ square. (This is the center of this quilt block. It’s flanked by the results of the Blue 3 1/4″ square, which will create ONE (1) Snowball Corner, as needed to sew this quilt block together.)
• Tan: Cut FOUR (4) 3 3/8″ squares. (These are paired on ONE (1) side with the White 2 7/8″ squares which will create FIVE (5) Snowball Corners. They’re also paired with the White 1 7/8″ x 3 3/8″ rectangles as needed to sew this quilt block together.)
• Tan: Cut TWO (2) 3 1/4″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles per square. (These will flank the results of the White 2 7/8″ squares, which will create FOUR (4) Flying Geese, as needed to sew this quilt block together.)
• White: Cut EIGHT (8) 1 7/8″ squares. (These are paired with the Blue 1 7/8″ squares as needed to sew this quilt block together.)
• White: Cut FOUR (4) 2 3/8″ squares. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time. (These are paired with the Tan 3 3/8″ squares which will create FOUR (4) Snowball Corners. They’ll also be the FOUR (4) corners of this quilt block.)
• White: Cut TWO (2) 2 3/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. These are flanked by the results of the Tan 3 1/4″ square, which will create FOUR (4) Flying Geese, as needed to sew this quilt block together.)
• White: Cut THREE (3) 3 1/4″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles per square. (These will flank the Blue 1 7/8″ squares as needed to sew this quilt block together.)
• White: Cut FOUR (4) 1 7/8″ x 3 3/8″ rectangles. (These are paired on ONE (1) side with the Tan 3 3/8″ squares & they’re also paired on ONE (1) other side by the White/Tan Flying Geese. All are needed to sew this quilt block together.)

Domino Star Variation Quilt Block Diagram

Domino Star Variation Quilt