Spring Star Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Green: Cut FIVE (5) 2 5/8″ squares. (These are paired with the White 2 5/8″ squares which will create ONE (1) Nine-Patch. They’ll also be the center of this quilt block.)
• Green: Cut EIGHT (8) 2 3/8″ squares. (These are paired with the White 2 3/8″ squares, which will create SIXTEEN (16) Half-Square Triangles, as needed for this quilt block.)
• Green: Cut FOUR (4) 2 5/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. (These will flank the results of the White 4 1/4″ square, which will create FOUR (4) Flying Geese, as needed for this quilt block.)
• White: Cut FOUR (4) 2″ squares. (These are the FOUR (4) corner’s of this quilt block.)
• White: Cut FOUR (4) 2 5/8″ squares. (These are paired with the Green 2 5/8″ squares which will create ONE (1) Nine-Patch. They’ll also be the center of this quilt block.)
• White: Cut EIGHT (8) 2 3/8″ squares. On the back side of each square draw a diagonal line, corner-to-corner, ONE (1) time. (These are paired with the Green 2 3/8″ squares, which will create SIXTEEN (16) Half-Square Triangles, as needed for this quilt block.)
• White: Cut ONE (1) 4 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles. (These will be flanked by the results of the Green 2 5/8″ squares, which will create FOUR (4) Flying Geese, as needed for this quilt block.)
• White: Cut TWO (2) 5 3/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. (These will flank the Nine-Patch in the center of this quilt block.)

Spring Star Quilt Block Diagram

Spring Star Quilt

If you make TWELVE (12) “Spring Star Quilt Blocks,” you will end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.

Spring Star Variation Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Green: Cut FIVE (5) 2 5/8″ squares. (These are paired with the White 2 5/8″ & the Quarter-Square Triangle to create the center of this quilt block.)
• Green: Cut ONE (1) 2 3/8″ square. Then cut the square diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles. (This is paired with the results of the White 2 3/8″ square which will create ONE (1) Quarter-Square Triangle. It’ll also be the center of the Nine-Patch that’s in the center of this quilt block.)
• Green: Cut EIGHT (8) 2 3/8″ squares. (These are paired with the White 2 3/8″ squares, which will create SIXTEEN (16) Half-Square Triangles, as needed for this quilt block.)
• Green: Cut FOUR (4) 2 3/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. (These will flank the results of the White 4 1/4″ square, which will create FOUR (4) Flying Geese, as needed for this quilt block.)
• White: Cut FOUR (4) 2″ squares. (These are the FOUR (4) corner’s of this quilt block.)
• White: Cut FOUR (4) 2 5/8″ squares. (These are paired with the Green 2 5/8″ & the Quarter-Square Triangle to create the center of this quilt block.)
• White: Cut EIGHT (8) 2 3/8″ squares. On the back side of each square draw a diagonal line, corner-to-corner, ONE (1) time. (These are paired with the Green 2 3/8″ squares, which will create SIXTEEN (16) Half-Square Triangles, as needed for this quilt block.)
• White: Cut ONE (1) 2 3/8″ square. Then cut the square diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles. (This is paired with the results of the Green 2 3/8″ square which will create ONE (1) Quarter-Square Triangle. It’ll also be the center of the Nine-Patch that’s in the center of this quilt block.)
• White: Cut ONE (1) 4 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles. (These are flanked by the results of the Green
  2 3/8″ squares, which will create FOUR (4) Flying Geese, as needed for this quilt block.)
• White: Cut TWO (2) 5 3/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. (These will flank the Nine-Patch that’s in the center of this quilt block.)

Spring Star Variation Quilt Block Diagram

Spring Star Variation Quilt

If you make TWELVE (12) “Spring Star Variation Quilt Blocks,” you will end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.

Honeymoon Star Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Dark Pink: Cut FOUR (4) 2 1/2″ squares. (These are flanked by the results of the Light Pink
  2 7/8″ squares which will help create the FOUR (4) corner’s of this quilt block.)
• Dark Pink: Cut ONE (1) 4 1/2″ square. (This is the center of this quilt block.)
• Light Pink: Cut FOUR (4) 2 7/8″ squares. (These are paired with the White 2 7/8″ squares, which will create EIGHT (8) Half-Square Triangles. They’ll also help create the FOUR (4) corner’s of this quilt block.)
• Light Pink: Cut TWO (2) 5 1/4″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles. (These are paired with the results of the White 5 1/4″ squares, which will create FOUR (4) Quarter-Square Triangles, as needed for this quilt block.)
• White: Cut FOUR (4) 2 1/2″ squares. (These are the FOUR (4) corner’s of this quilt block.)
• White: Cut FOUR (4) 2 7/8″ squares. On the back side of each square draw a diagonal line, corner-to-corner, ONE (1) time. (These are paired with the Light Pink 2 7/8″ squares, which will create EIGHT (8) Half-Square Triangles. They’ll also help create the FOUR (4) corner’s of this quilt block.)
• White: Cut TWO (2) 5 1/4″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles. (These are paired with the results of the Light Pink 5 1/4″ squares, which will create FOUR (4) Quarter-Square Triangles, as needed for this quilt block.)

Honeymoon Star Quilt Block Diagram

Honeymoon Star Quilt

If you make TWELVE (12) “Honeymoon Star Quilt Blocks,” you will end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.

Honeymoon Star Variation Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Lilac: Cut FOUR (4) 2 1/2″ squares. (These are flanked by the results of the Purple 2 7/8″ squares. They’ll also help create the FOUR (4) corner’s of this quilt block.)
• Lilac: Cut ONE (1) 3 3/8″ square. (This is flanked by the results of the Purple 2 7/8″ squares which will create ONE (1) Square in a Square. It’ll also be the center of this quilt block.)
• Purple: Cut FOUR (4) 2 7/8″ squares. (These are paired with the White 2 7/8″ squares, which will create EIGHT (8) Half-Square Triangles. They’ll also help create the FOUR (4) corner’s of this quilt block.)
• Purple: Cut TWO (2) 2 7/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. (These will flank the Lilac 3 3/8″ square, which will create ONE (1) Square in a Square, as needed for this quilt block.)

• Purple: Cut TWO (2) 5 1/4″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles per square. (These are paired with the results of the White 5 1/4″ squares, which will create FOUR (4) Quarter-Square Triangles, as needed for this quilt block.)
• White: Cut FOUR (4) 2 1/2″ squares. (These are the FOUR (4) corner’s of this quilt block.)
• White: Cut FOUR (4) 2 7/8″ squares. On the back side of each square draw a diagonal line, corner-to-corner, ONE (1) time. (These are paired with the Purple 2 7/8″ squares, which will create EIGHT (8) Half-Square Triangles. They’ll also help create the FOUR (4) corner’s of this quilt block.)
• White: Cut TWO (2) 5 1/4″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles per square. (These are paired with the results of the Purple 5 1/4″ squares, which will create FOUR (4) Quarter-Square Triangles, as needed for this quilt block.)

Honeymoon Star Variation Quilt Block Diagram

Honeymoon Star Variation Quilt

If you make TWELVE (12) “Honeymoon Star Variation Quilt Blocks,” you will end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.

Stockyard’s Star Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Red: Cut FIVE (5) 3 1/2″ squares. (ONE (1) of these is the center of this quilt block. The remaining FOUR (4) of these are the FOUR (4) corner’s of this quilt block.)
• Red: Cut ONE (1) 7 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles. (These are flanked by the results of the White
  2 3/8″ squares, which will create FOUR (4) Flying Geese, as needed for this quilt block.)
• Dark Red: Cut SIX (6) 2 3/8″ squares. On the back side of each square draw a diagonal line, corner-to-corner, ONE (1) time. (These are paired with the White 2 3/8″ squares, which will create TWELVE (12) Half-Square Triangles, as needed for this quilt block.)
• White: Cut SIX (6) 2 3/8″ squares. (These are paired with the Dark Red 2 3/8″ squares, which will create TWELVE (12) Half-Square Triangles, as needed for this quilt block.)
• White: Cut EIGHT (8) 2 3/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. (These will flank the results of the Red 7 1/4″ square, which will create FOUR (4) Flying Geese, as needed for this quilt block.)
• White: Cut FOUR (4) 2″ x 3 1/2″ strips. (These will flank the center Red 3 1/2″ square as needed for this quilt block.)

Stockyard’s Star Quilt Block Diagram

Stockyard’s Star Quilt

If you make TWELVE (12) “Stockyard’s Star Quilt Blocks,” you will end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.

Stockyard’s Star Variation Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Dark Green: Cut TWO (2) 3 7/8″ squares. (These are paired with the Green 3 7/8″ squares which will create FOUR (4) Half-Square Triangles. They’ll also be the FOUR (4) corner’s of this quilt block.)
• Dark Green: Cut ONE (1) 4 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles. You only need two of these triangles to make this quilt block. (These are paired with the results of the Green 4 1/4″ square which will create ONE (1) Quarter-Square triangle. It’ll also be the center of this quilt block.)
• Dark Green: Cut ONE (1) 7 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles. (These are flanked by the results of the White 2 3//8″ squares, which will create FOUR (4) Flying Geese, as needed for this quilt block.)
• Green: Cut TWO (2) 3 7/8″ squares. (These are paired with the Dark Green 3 7/8″ squares which will create FOUR (4) Half-Square Triangles. They’ll also be the FOUR (4) corner’s of this quilt block.)
• Green: Cut SIX (6) 2 3/8″ squares. (These are paired with the White 2 3/8″ squares, which will create TWELVE (12) Half-Square Triangles, as needed for this quilt block.)
• Green: Cut ONE (1) 4 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles. You only need two of these triangles to make this quilt block. (These are paired with the results of the Dark Green 4 1/4″ square which will create ONE (1) Quarter-Square triangle. It’ll also be the center of this quilt block.)
• White: Cut SIX (6) 2 3/8″ squares. On the back side of each square draw a diagonal line, corner-to-corner, ONE (1) time. (These are paired with the Green 2 3/8″ squares, which will create TWELVE (12) Half-Square Triangles, as needed for this quilt block.)
• White: Cut EIGHT (8) 2 3/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. (These will flank the results of the Dark Green 7 1/4″ square, which will create FOUR (4) Flying Geese, as needed for this quilt block.)
• White: Cut TWO (2) 3 7/8″ squares. On the back side of each square draw a diagonal line, corner-to-corner, ONE (1) time. (These are paired with the Dark Green 3 7/8″ squares which will create FOUR (4) Half-Square Triangles. They’ll also be the FOUR (4) corner’s of this quilt block.)
• White: Cut FOUR (4) 2″ x 3 1/2″ strips. (These will flank the results of the Dark Green 4 1/4″ square & the results of the Green 4 1/4″ square.)

Stockyard’s Star Variation Quilt Block Diagram

Stockyard’s Star Variation Quilt

If you make TWELVE (12) “Stockyard’s Star Quilt Blocks,” you will end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.