White Star Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Aqua: Cut FOUR (4) 2 3/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. (These will flank the results of the White 4 1/4″ square, which will create FOUR (4) Flying Geese, as needed to sew this quilt block together.)
• Aqua: Cut TWO (2) 3 7/8″ squares. (These are paired with the White 3 7/8″ squares, which will create FOUR (4) Half-Square Triangles, as needed to sew this quilt block together.)
• Aqua: Cut FOUR (4) 2″ x 3 1/2″ rectangles. (These are paired with TWO (2) sides of the Aqua/White Flying Geese. They’re also paired with ONE (1) side of the Aqua/White Half-Square Triangles. All are needed to sew this quilt block together.)
• Aqua: Cut FOUR (4) 2″ x 5 1/2″ rectangles. (These are the FOUR (4) corners of this quilt block. They’re paired with TWO (2) sides of the Aqua/White Flying Geese. They’re also paired with ONE (1) side of the Aqua/White Half-Square Triangles. All are needed to sew this quilt block together.)
• White: Cut TWO (2) 3 7/8″ squares. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time. (These are paired with the Aqua 3 7/8″ squares, which will create FOUR (4) Half-Square Triangles, as needed to sew this quilt block together.)
• White: Cut FOUR (4) 3 1/2″ squares. (These are paired with the Aqua/White Half-Square Triangles. They’ll help create the center of this quilt block as needed to sew it together.)
• White: Cut ONE (1) 5 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles. (These are flanked by the results of the Aqua
  2 3/8″ squares, which will create FOUR (4) Flying Geese, as needed to sew this quilt block together.)

White: Cut ONE (1) 5 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles. (These are paired with each other which will create ONE (1) Quarter-Square Triangle. This is then the center of this quilt block as needed to sew it together.)

White Star Quilt Block Diagram

White Star Quilt

If you sew TWELVE (12) “White Star Quilt Blocks” you’ll end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.

White Star Variation Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Green: Cut FOUR (4) 2 3/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. (These will flank the results of the White 4 1/4″ square, which will create FOUR (4) Flying Geese, as needed to sew this quilt block together.)
• Green: Cut TWO (2) 3 7/8″ squares. (These are paired with the White 3 7/8″ squares, which will create FOUR (4) Half-Square Triangles, as needed to sew this quilt block together.)
• Green: Cut EIGHT (8) 2″ x 3 1/2″ rectangles. (These are paired with TWO (2) sides of the Aqua/White Flying Geese. They’re also paired with TWO (2) sides of the Aqua/White Half-Square Triangles. All are needed to sew this quilt block together.)
• White: Cut FOUR (4) 2″ squares. (These are the FOUR (4) corners of this quilt block. They’re paired with the 2″ x 3 1/2″ rectangles as needed to sew this quilt block together.)
• White: Cut TWO (2) 3 7/8″ squares. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time. (These are paired with the Green 3 7/8″ squares, which will create FOUR (4) Half-Square Triangles, as needed to sew this quilt block together.)
• White: Cut FOUR (4) 3 1/2″ squares. (These are paired with the Green/White Half-Square Triangles. They’ll help create the center of this quilt block as needed to sew it together.)
• White: Cut ONE (1) 5 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles. (These are flanked by the results of the Green
  2 3/8″ squares, which will create FOUR (4) Flying Geese, as needed to sew this quilt block together.)
• White: Cut ONE (1) 5 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles. (These are paired with each other which will create ONE (1) Quarter-Square Triangle. This is then the center of this quilt block as needed to sew it together.)

White Star Variation Quilt Block Diagram

White Star Variation Quilt

If you sew TWELVE (12) “White Star Variation Quilt Blocks” you’ll end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.

Maltese Star Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Green: Cut TWO (2) 5 1/4″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles per square. (These are paired with the results of the Lt. Green 5 1/4″ squares, which will create FOUR (4) Quarter-Square Triangles, as needed to sew this quilt block together.)
• Lt. Green: Cut TWO (2) 5 1/4″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles per square. (These are paired with the results of the Green 5 1/4″ squares, which will create FOUR (4) Quarter-Square Triangles, as needed to sew this quilt block together.)
• Lt. Green: Cut FIVE (5) 3 1/4″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles per square. (These will flank the White
  2 1/2″ squares which will create FIVE (5) Square in a Squares. FOUR (4) of these Square in a Squares are the FOUR (4) corners of this quilt block. The remaining ONE (1) of these Square in a Squares is the center of this quilt block.)
• White: Cut FIVE (5) 2 1/2″ squares. (These are flanked by the results of the Lt. Green 3 1/4″ squares which will create FIVE (5) Square in a Squares. FOUR (4) of these Square in a Squares are the FOUR (4) corners of this quilt block. The remaining ONE (1) of these Square in a Squares is the center of this quilt block.)
• White: Cut TEN (10) 2 7/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. (These will flank the results of the Lt. Green 3 1/4″ squares which will create FIVE (5) additional Square in a Squares. FOUR (4) of these Square in a Squares are the FOUR (4) corners of this quilt block. The remaining ONE (1) of these Square in a Squares is the center of this quilt block.)

Maltese Star Quilt Block Diagram

Maltese Star Quilt

If you sew TWELVE (12) “Maltese Star Quilt Blocks” you’ll end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.

Maltese Star Variation Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Bright Pink: Cut TWO (2) 5 1/4″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles per square. (These are paired with the results of the Lt. Pink 5 1/4″ squares, which will create FOUR (4) Quarter-Square Triangles, as needed to sew this quilt block together.)
• Lt. Pink: Cut TWO (2) 5 1/4″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles per square. (These are paired with the results of the Bright Pink 5 1/4″ squares, which will create FOUR (4) Quarter-Square Triangles, as needed to sew this quilt block together.)
• Pink: Cut FIVE (5) 1 7/8″ squares. (These are flanked by the results of the White 1 7/8″ squares which will create FIVE (5) Square in a Squares. FOUR (4) of these Square in a Squares are the FOUR (4) corners of this quilt block. The remaining ONE (1) of these Square in a Squares is the center of this quilt block.)
• Pink: Cut FIVE (5) 3 1/4″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles per square. (These will flank the results of the White 1 7/8″ squares which will create FIVE (5) Square in a Squares. FOUR (4) of these Square in a Squares are the FOUR (4) corners of this quilt block. The remaining ONE (1) of these Square in a Squares is the center of this quilt block.)
• White: Cut TEN (10) 1 7/8″ squares. (These will flank the results of the Pink 3 1/4″ squares which will create FIVE (5) Square in a Squares. FOUR (4) of these Square in a Squares are the FOUR (4) corners of this quilt block. The remaining ONE (1) of these Square in a Squares is the center of this quilt block.)
• White: Cut TEN (10) 2 7/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. (These will flank the results of the Lt. Green 3 1/4″ squares which will create FIVE (5) additional Square in a Squares. FOUR (4) of these Square in a Squares are the FOUR (4) corners of this quilt block. The remaining ONE (1) of these Square in a Squares is the center of this quilt block.)

Maltese Star Variation Quilt Block Diagram

Maltese Star Variation Quilt

If you sew TWELVE (12) “Maltese Star Variation Quilt Blocks” you’ll end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.

Ann’s Star Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Blue: Cut EIGHT (8) 3 7/8″ squares. (These are paired with the White 3 7/8″ squares which will create SIXTEEN (16) Half-Square Triangles. FOUR (4) of these Half-Square Triangles are the FOUR (4) corners of this quilt block.)
• White: Cut EIGHT (8) 3 7/8″ squares. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time. (These are paired with the Blue 3 7/8″ squares which will create SIXTEEN (16) Half-Square Triangles. FOUR (4) of these Half-Square Triangles are the FOUR (4) corners of this quilt block.)

Ann’s Star Quilt Block Diagram

Ann’s Star Quilt

If you sew TWELVE (12) “Ann’s Star Quilt Blocks” you’ll end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.

Ann’s Star Variation Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Pink: Cut FOUR (4) 3 7/8″ squares. (These are paired with the White 3 7/8″ squares which will create EIGHT (8) Half-Square Triangles. FOUR (4) of them will create the center of this quilt block. The remaining FOUR (4) of them are the FOUR (4) corners of this quilt block.)
• Pink: Cut FOUR (4) 3 7/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. (These will flank the results of the White 7 1/4″ square, which will create FOUR (4) Flying Geese, as needed to sew this quilt block together.)
• White: Cut FOUR (4) 3 7/8″ squares. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time. (These are paired with the Pink 3 7/8″ squares which will create EIGHT (8) Half-Square Triangles. FOUR (4) of them will create the center of this quilt block. The remaining FOUR (4) of them are the FOUR (4) corners of this quilt block.)
• White: Cut ONE (1) 7 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles. (These triangles are flanked by the Pink 3 7/8″ squares, which will create FOUR (4) Flying Geese, as needed to sew this quilt block together.)

Ann’s Star Variation Quilt Block Diagram

Ann’s Star Variation Quilt

If you sew TWELVE (12) “Ann’s Star Variation Quilt Blocks” you’ll end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.