Ramble Star Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Dk. Purple: Cut FOUR (4) 3 7/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. (These are flanked by the results of the White 2 3/8″ squares, as well as the results of the White 4 1/4″ squares & the results of the Purple 2 3/8″ squares. When sewn together they’ll create FOUR (4) Flying Geese as needed for this quilt block.)
• Purple: Cut FOUR (4) 2 3/8″ squares. (These are paired with the White 2 3/8″ squares which will create EIGHT (8) Half-Square Triangles. They’ll also help create the FOUR (4) corners of this quilt block.)
• Purple: Cut EIGHT (8) 2 3/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. (These will flank the results of the White 4 1/4″ square which will create SIXTEEN (16) Flying Geese. FOUR (4) of these Flying Geese will help create the center of this quilt block.)
• White: Cut TWELVE (12) 2″ squares. (FOUR (4) of these will be the FOUR (4) corners of this quilt block. The remaining EIGHT (8) of them are needed for the rest of the quilt block.)
• White: Cut FOUR (4) 2 3/8″ squares. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time. (These are paired with the Purple 2 3/8″ squares which will create EIGHT (8) Half-Square Triangles. They’ll also help create the FOUR (4) corners of this quilt block.)
• White: Cut FOUR (4) 2 3/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. (These will flank the results of the Dk. Purple 3 7/8″ squares & they’ll also flank the results of the Purple 2 3/8″ squares. When sewn together with the results of the White 4 1/4″ squares they’ll create FOUR (4) Flying Geese, as needed for this quilt block.)

Ramble Star Quilt Block Diagram

Ramble Star Quilt

If you make TWELVE (12) “Ramble Star Quilt Blocks,” you’ll end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.

Ramble Star Variation Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Red: Cut FOUR (4) 3 7/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. (These are flanked by the results of the White 2 3/8″ squares, as well as the results of the White 4 1/4″ squares & the results of the Pink 2 3/8″ squares. When sewn together they’ll create FOUR (4) Flying Geese as needed for this quilt block.)
• Pink: Cut ONE (1) 2 5/8″ square. (This is the center of this quilt block. It’s flanked by the results of the White 2 3/8″ squares which will create ONE (1) Square in a Square.)
• Pink: Cut FOUR (4) 2 3/8″ squares. (These are paired with the White 2 3/8″ squares which will create EIGHT (8) Half-Square Triangles. They’ll also help create the FOUR (4) corners of this quilt block.)
• Pink: Cut EIGHT (8) 2 3/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. (These will flank the results of the White 4 1/4″ square which will create SIXTEEN (16) Flying Geese. FOUR (4) of these Flying Geese will help create the center of this quilt block.)
• White: Cut TWELVE (12) 2″ squares. (FOUR (4) of these will be the FOUR (4) corners of this quilt block. The remaining EIGHT (8) of them are needed for the rest of the quilt block.)
• White: Cut TWO (2) 2 3/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. (These will flank the Pink 2 3/8″ square which will create ONE (1) Square in a Square. They’ll also help create the center of this quilt block.)
• White: Cut FOUR (4) 2 3/8″ squares. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time. (These are paired with the Pink 2 3/8″ squares which will create EIGHT (8) Half-Square Triangles. They’ll also help create the FOUR (4) corners of this quilt block.)
• White: Cut FOUR (4) 2 3/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. (These will flank the results of the Red 3 7/8″ squares & they’ll also flank the results of the Pink 2 3/8″ squares. When sewn together with the results of the White 4 1/4″ squares they’ll create FOUR (4) Flying Geese, as needed for this quilt block.)

Ramble Star Variation Quilt Block Diagram

If you make TWELVE (12) “Ramble Star Variation Quilt Blocks,” you’ll end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.

Mountain Star Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Green: Cut EIGHT (8) 2 3/8″ squares. (These are paired with the White 2 3/8″ squares, which will create SIXTEEN (16) Half-Square Triangles, as needed for this quilt block.)
• Green: Cut FOUR (4) 2 3/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. (These will flank the results of the White 4 1/4″ square, which will create FOUR (4) Flying Geese, as needed for this quilt block.)
• Green: Cut SIX (6) 2 3/8″ squares. (These are paired with the results of the White 2 3/8″ squares which will create FOUR (4) Quarter-Square Triangles. They’ll also help create the center of this quilt block.)
• Green: Cut TWO (2) 5 3/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. (These will flank the center section of this quilt block which will create ONE (1) Square in a Square.)
• White: Cut FOUR (4) 2″ squares. (These are the FOUR (4) corners of this quilt block.)
• White: Cut ONE (1) 2 5/8″ square. (This is the center of this quilt block. It’s flanked by the Quarter-Square Triangles.)
• White: Cut FOUR (4) 2 5/8″ squares. (These are paired with the Quarter-Square Triangles & will help create the center of this quilt block.)
• White: Cut EIGHT (8) 2 3/8″ squares. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time. (These are paired with the Green 2 3/8″ squares, which will create SIXTEEN (16) Half-Square Triangles, as needed for this quilt block.)
• White: Cut TWO (2) 2 3/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. (These are paired with the results of the Green 2 3/8″ squares which will create FOUR (4) Quarter-Square Triangles. They’ll also help create the center of this quilt block.)
• White: Cut ONE (1) 4 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles. (These are flanked by the results of the Green
  2 3/8″ squares, which will create FOUR (4) Flying Geese, as needed for this quilt block.)

Mountain Star Quilt Block Diagram

Mountain Star Quilt

If you make TWELVE (12) “Mountain Star Quilt Blocks,” you’ll end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.

Mountain Star Variation Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Blue: Cut EIGHT (8) 2 3/8″ squares. (These are paired with the White 2 3/8″ squares, which will create SIXTEEN (16) Half-Square Triangles, as needed for this quilt block.)
• Blue: Cut FOUR (4) 2 3/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. (These will flank the results of the White 4 1/4″ square, which will create FOUR (4) Flying Geese, as needed for this quilt block.)
• Blue: Cut SIX (6) 2 3/8″ squares. (These are paired with the results of the White 2 3/8″ squares which will create FOUR (4) Quarter-Square Triangles. They’ll also help create the center of this quilt block.)
• Blue: Cut ONE (1) 2 3/8″ square. Then cut the square diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles. (These are paired with the results of the White
  2 3/8″ square which will create ONE (1) Quarter-Square Triangle. They’ll be the the very center of this quilt block.)
• Blue: Cut TWO (2) 5 3/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. (These will flank the center section of this quilt block which will create ONE (1) Square in a Square.)
• White: Cut FOUR (4) 2″ squares. (These are the FOUR (4) corners of this quilt block.)
• White: Cut EIGHT (8) 2 3/8″ squares. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time. (These are paired with the Blue 2 3/8″ squares, which will create SIXTEEN (16) Half-Square Triangles, as needed for this quilt block.)
• White: Cut TWO (2) 2 3/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. (These are paired with the results of the Blue 2 3/8″ squares which will create FOUR (4) Quarter-Square Triangles. They’ll also help create the center of this quilt block.)
• White: Cut ONE (1) 2 3/8″ square. Then cut the square diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles. (These are paired with the results of the Blue 2 3/8″ square which will create ONE (1) Quarter-Square Triangle. They’ll be the the very center of this quilt block.)
• White: Cut ONE (1) 4 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles. (These are flanked by the results of the Blue
  2 3/8″ squares, which will create FOUR (4) Flying Geese, as needed for this quilt block.)

Mountain Star Variation Quilt Block Diagram

Mountain Star Variation Quilt

If you make TWELVE (12) “Mountain Star Variation Quilt Blocks,” you’ll end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.