Kansas Star Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Purple: Cut FIVE (5) 2 7/8″ squares. (These are paired with the White 2 7/8″ squares, which will create TEN (10) Half-Square Triangles. FOUR (4) of these Half-Square Triangles will help create the FOUR (4) corner’s of this quilt block. ONE (1) of these Half-Square Triangles will help create the center of this quilt block.)
• Purple: Cut EIGHT (8) 2 7/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. (These will flank the White
  3 3/8″ squares, which will create FOUR (4) Square in a Squares, as needed for this quilt block.)
• White: Cut TEN (10) 2 1/2″ squares. (These will flank the results of the Purple 2 7/8″ squares & will help create the FOUR (4) corners of this quilt block.)
• White: Cut FOUR (4) 3 3/8″ squares. (These will be flanked by the results of the Purple 2 7/8″ squares, which will create FOUR (4) Square in a Squares, as needed for this quilt block.)
• White: Cut FIVE (5) 2 7/8″ squares. On the back side of each square draw a diagonal line, corner-to-corner, ONE (1) time. (These are paired with the Purple 2 7/8″ squares, which will create TEN (10) Half-Square Triangles. FOUR (4) of these Half-Square Triangles will help create the FOUR (4) corner’s of this quilt block. ONE (1) of these Half-Square Triangles will help create the center of this quilt block.)

Kansas Star Quilt Block Diagram

Kansas Star Quilt

If you make TWELVE (12) “Kansas Star Quilt Blocks”, you will end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.

Kansas Star Variation Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Pink: Cut ONE (1) 3 1/4″ square. (This is flanked by the results of the White 2 7/8″ square which will create ONE (1) Square in a Square. It’ll also be the center of this quilt block.)
• Pink: Cut FOUR (4) 2 7/8″ squares. (These are paired with the White 2 7/8″ squares which will create EIGHT (8) Half-Square Triangles. They’ll also help create the FOUR (4) corner’s of this quilt block.)
• Pink: Cut EIGHT (8) 2 7/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. (These will flank the White 3 3/8″ squares, which will create FOUR (4) Square in a Squares, as needed for this quilt block.)
• White: Cut EIGHT (8) 2 1/2″ squares. (These will flank the results of the Pink 2 7/8″ squares. They’ll also help create the FOUR (4) corner’s of this quilt block.)
• White: Cut FOUR (4) 3 3/8″ squares. (These will be flanked by the results of the Pink 2 7/8″ squares, which will create FOUR (4) Square in a Squares, as needed for this quilt block.)
• White: Cut FOUR (4) 2 7/8″ squares. On the back side of each square draw a diagonal line, corner-to-corner, ONE (1) time. (These are paired with the Pink 2 7/8″ squares which will create EIGHT (8) Half-Square Triangles. They’ll also help create the FOUR (4) corner’s of this quilt block.)
• White: Cut TWO (2) 2 7/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You will end up with TWO (2) triangles per square. (These will flank the Pink 3 3/8″ square. Which will create ONE (1) Square in a Square. They’ll also help create the center of this quilt of this quilt block.)

Kansas Star Variation Quilt Block Diagram

Kansas Star Variation Quilt

If you make TWELVE (12) “Kansas Star Variation Quilt Blocks”, you will end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.

Washington Star Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Lt. Gray: Cut TWO (2) 2 3/8″ squares. (These are paired with the White 2 3/8″ squares which will create FOUR (4) Half-Square Triangles. They’ll also be the FOUR (4) corner’s of this quilt block.)
• Lt. Gray: Cut ONE (1) 4 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles. You only need TWO (2) of these triangles for this quilt block. (These are flanked by the results of the White 2 3/8″ squares, which will create TWO (2) Flying Geese, as needed for this quilt block.)
• Lt. Peach: Cut TWO (2) 4 1/4″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles per square. (These are paired with the results of the White 4 1/4″ squares, which will create FIVE (5) Quarter-Square Triangles, as needed for this quilt block.)
• Lt. Peach: Cut ONE (1) 4 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles. You only need TWO (2) of these triangles for this quilt block. (These are flanked by the results of the White 2 3/8″ squares, which will create TWO (2) Flying Geese, as needed for this quilt block.)
• White: Cut TWO (2) 2 3/8″ squares. On the back side of each square draw a diagonal line, corner-to-corner, ONE (1) time. (These will be paired with the Lt. Gray 2 3/8″ squares which will create FOUR (4) Half-Square Triangles. They’ll also be the FOUR (4) corner’s of this quilt block.)
• White: Cut TWO (2) 2 3/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. (These will flank the results of the Lt. Gray 4 1/4″ square, which will create TWO (2) Flying Geese, as needed for this quilt block.)
• White: Cut TWO (2) 2 3/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. (These will flank the results of the Lt. Peach 4 1/4″ square, which will create TWO (2) Flying Geese, as needed for this quilt block.
• White: Cut EIGHT (8) 2″ x 3 1/2″ strips. (These are flanked on TWO (2) ends by the results of the White 2 3/8″ squares as needed for this quilt block.)
• White: Cut THREE (3) Then cut the squares diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles per square. You only need TEN (10) of these triangles for this quilt block. (These are paired with the results of the Lt. Peach 4 1/4″ squares, which will create FIVE (5) Quarter-Square Triangles, as needed for this quilt block.)
• White: Cut FOUR (4) 3 1/2″ squares. (These are flanked by the results of the Lt. Peach 4 1/4″ squares as needed for this quilt block.)

Washington Star Quilt Block Diagram

If you make TWELVE (12) “Washington Star Quilt Blocks”, you would end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.

Washington Star Variation Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Gray: Cut TWO (2) 2 3/8″ squares. (These are paired with the White 2 3/8″ squares, which will create FOUR (4) Half-Square Triangles. They’ll also be the FOUR (4) corner’s of this quilt block.)
• Gray: Cut EIGHT (8) 2 3/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. (These will flank the results of the White 4 1/4″ squares, which will create EIGHT (8) Flying Geese, as needed for this quilt block.)
• Gray: Cut ONE (1) 4 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles. You only need TWO (2) of these triangles for this quilt block. (These will be flanked by the results of the White 2 3/8″ squares, which will create TWO (2) Flying Geese, as needed for this quilt block.)
• Blue: Cut TWO (2) 4 1/4″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles per square. (These are paired with the results of the White 4 1/4″ squares, which will create FIVE (5) Quarter-Square Triangles, as needed for this quilt block.)
• Blue: Cut ONE (1) 4 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles. You only need TWO (2) of these triangles for this quilt block. (These will be flanked by the results of the White 2 3/8″ squares, which will create TWO (2) Flying Geese, as needed for this quilt block.
• White: Cut TWO (2) 2 3/8″ squares. On the back side of each square draw a diagonal line, corner-to-corner, ONE (1) time. (These are paired with the Gray 2 3/8″ squares, which will create FOUR (4) Half-Square Triangles. They’ll also be the FOUR (4) corner’s of this quilt block.)
• White: Cut TWO (2) 2 3/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. (These will flank the results of the Gray 4 1/4″ square, which will create TWO (2) Flying Geese, as needed for this quilt block.)
• White: Cut TWO (2) 2 3/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. (These will flank the results of the Blue 4 1/4″ square, which will create TWO (2) Flying Geese, as needed for this quilt block.)
• White: Cut ONE (1) 4 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles. You only need TWO (2) of these triangles for this quilt block. (These are flanked by the results of the White 2 3/8″ squares, which will create TWO (2) Flying Geese, as needed for this quilt block.)
• White: Cut THREE (3) 4 1/4″ squares. Then cut the square diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles per square. You only need TEN (10) of these triangles for this quilt block. (These are paired with the results of the Blue 4 1/4″ squares, which will create FIVE (5) Quarter-Square Triangles, as needed for this quilt block.)
• White: Cut FOUR (4) 3 1/2″ squares. (These are flanked by the results of the Blue 4 1/4″ squares as needed for this quilt block.)

Washington Star Variation Quilt Block Diagram

If you make TWELVE (12) “Washington Star Variation Quilt Blocks”, you would end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.

Twinkling Star Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Green: Cut FOUR (4) 2 3/8″ squares. (These are paired with the White 2 3/8″ squares, which will create EIGHT (8) Half-Square Triangles, as needed for this quilt block.)
• Green: Cut EIGHT (8) 2 3/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. (These will flank the results of the White 2 3/8″ squares & the results of the White 7 1/4″ square, as needed for this quilt block.)
• White: Cut FOUR (4) 3 1/2″ squares. (These are the FOUR (4) corner’s of this quilt block.)
• White: Cut FOUR (4) 2 3/8″ squares. On the back side of each square draw a diagonal line, corner-to-corner, ONE (1) time. (These are paired with the Green 2 3/8″ squares, which will create EIGHT (8) Half-Square Triangles, as needed for this quilt block.)
• White: Cut TWO (2) 3 7/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. (These will flank the results of the Green 3 7/8″ squares & the Green 2 3/8″ squares. They’ll also help create the center of this quilt block.)
• White: Cut ONE (1) 7 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles. (These are flanked on ONE (1) side by the results of the Green 3 7/8″ squares. And they’ll be flanked on ONE (1) other side by the results of the Green 2 3/8″ squares. Which will create FOUR (4) Flying Geese as needed for this quilt block.)

Twinkling Star Quilt Block Diagram

Twinkling Star Quilt

If you make TWELVE (12) “Twinkling Star Quilt Blocks,” you’ll end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.

Twinkling Star Variation Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Salmon: Cut SIX (6) 2 3/8″ squares. (These are paired with the White 2 3/8″ squares, which will create TWELVE (12) Half-Square Triangles, as needed for this quilt block.
• Salmon: Cut TWELVE (12) 2 3/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You will end up with TWO (2) triangles per square. (These will flank on ONE (1) side the results of the White 2 3/8″ squares as needed for this quilt block.)
• White: Cut FOUR (4) 3 1/2″ squares. (These are the FOUR (4) corner’s of this quilt block.)
• White: Cut SIX (6) 2 3/8″ squares. On the back side of each square draw a diagonal line, corner-to-corner, ONE (1) time. (These are paired with the Salmon 2 3/8″ squares, which will create TWELVE (12) Half-Square Triangles, as needed for this quilt block.)
• White: Cut TWO (2) 3 7/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. (These are flanked by the results of the Salmon 2 3/8″ squares. They’ll also help create the center of this quilt block.)
• White: Cut ONE (1) 7 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles. (These are flanked on ONE (1) side by the results of the Salmon 3 7/8″ squares. And they’ll be flanked on ONE (1) other side by the results of the Salmon 2 3/8″ squares. Which will create FOUR (4) Flying Geese as needed for this quilt block.)

Twinkling Star Variation Quilt Block Diagram

Twinkling Star Variation Quilt

If you make TWELVE (12) “Twinkling Star Variation Quilt Blocks,” you’ll end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.