Star in a Star Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Dk. Purple: Cut FOUR (4) 2 3/8″ squares. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time. (These are paired with the White 3 1/2″ squares, which will create EIGHT (8) Snowball Corners, once they’re all sewn together.)
• Purple: Cut ONE (1) 3 1/2″ square. (This is the center of this quilt block.)
• Purple: Cut EIGHT (8) 2″ squares. (These are sewn together with the Purple/White Half-Square Triangles & the White 2″ squares. When all are sewn together they’ll create the FOUR (4) corners of this quilt block.)
• Purple: Cut FOUR (4) 2 3/8″ squares. (These are paired with the White 2 3/8″ squares which will create EIGHT (8) Half-Square Triangles. When sewn together with the Purple 2″ squares & the White 2″ squares they’ll create the FOUR (4) corners of this quilt block.)
• Purple: Cut TWO (2) 2 3/8″ squares. (These are paired with the White 2 3/8″ squares which will create FOUR (4) Half-Square Triangles. They’re then sewn together with the White 2″ squares & with the Purple 3 1/2″ square. When sewn all together they’ll create the center of this quilt block.)
• White: Cut FOUR (4) 2″ squares. (These are sewn together with the White/Purple Half-Square Triangles & the Purple 2″ squares to create the FOUR (4) corners of this quilt block.)
• White: Cut EIGHT (8) 2″ squares. (These are sewn to each other & then to the White/Purple Half-Square Triangles. Plus they’re sewn to the Purple 3 1/2″ square which will create the center of this quilt block.)
• White: Cut TWO (2) 2 3/8″ squares. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time. (These are paired with the Purple 2 3/8″ squares which will create FOUR (4) Half-Square Triangles. When sewn together with the Purple 2″ squares & the White 2″ squares they’ll create the FOUR (4) corners of this quilt block.)
• White: Cut TWO (2) 2 3/8″ squares. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time. (These are paired with the Purple 2 3/8″ squares which will create FOUR (4) Half-Square Triangles. They’re then sewn together with the White 2″ squares & with the Purple 3 1/2″ square. When all are sewn together they’ll create the center of this quilt block.)
• White: Cut EIGHT (8) 3 1/2″ squares. (These are paired with the Dk. Purple 2 3/8″ squares, which will create EIGHT (8) Snowball Corners, as needed to sew this quilt block together.)

Star in a Star Quilt Block Diagram

Star in a Star Quilt

If you sew TWELVE (12) “Star in a Star Quilt Blocks” you’ll end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.

Star in a Star Variation Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Dk. Blue: Cut FOUR (4) 2 3/8″ squares. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time. (These are paired with the White 3 1/2″ squares, which will create EIGHT (8) Snowball Corners, once they’re all sewn together.)
• Dk. Blue: Cut FOUR (4) 2 3/8″ squares. (These are paired with the White 2 3/8″ squares which will create EIGHT (8) Half-Square Triangles. They’re then sewn together with the White 2″ squares & the Lt. Blue 2″ squares. When all are sewn together they’ll create the center of this quilt block.)
• Lt. Blue: Cut EIGHT (8) 2″ squares. (These are sewn together with the Lt. Blue/White Half-Square Triangles & the White 2″ squares. When all are sewn together they’ll create the FOUR (4) corners of this quilt block.)
• Lt. Blue: Cut FOUR (4) 2 3/8″ squares. (These are paired with the White 2 3/8″ squares which will create EIGHT (8) Half-Square Triangles. When sewn together with the Purple 2″ squares & the White 2″ squares they’ll create the FOUR (4) corners of this quilt block.)
• Lt. Blue: Cut FOUR (4) 2″ squares. (These are sewn together with the White 2″ squares & the Dk. Blue/White Half-Square Triangles. When all sewn together they’ll create the center of this quilt block.)
• Lt. Blue: Cut FOUR (4) 2 3/8″ squares. (These are paired with the White 2 3/8″ squares which will create EIGHT (8) Half-Square Triangles. They’re then sewn together with the White 2″ squares & with the Dk. Blue/White Half-Square Triangles. When sewn all together they’ll create the center of this quilt block.)
• White: Cut FOUR (4) 2″ squares. (These are sewn together with the Dk. Blue/White Half-Square Triangles & the Lt. Blue 2″ squares which will create the FOUR (4) corners of this quilt block.)
• White: Cut FOUR (4) 2″ squares. (These are sewn to each other & then to the Dk. Blue/White Half-Square Triangles & the Lt. Blue 2″ squares. When all sewn together they’ll create the center of this quilt block.)
• White: Cut TWO (2) 2 3/8″ squares. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time. (These are paired with the Lt. Blue 2 3/8″ squares which will create FOUR (4) Half-Square Triangles. When sewn together with the Lt. Blue 2″ squares & the White 2″ squares they’ll create the FOUR (4) corners of this quilt block.)
• White: Cut FOUR (4) 2 3/8″ squares. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time. (These are paired with the Dk. Blue 2 3/8″ squares which will create EIGHT (8) Half-Square Triangles. They’re then sewn together with the White 2″ squares & with the Lt. Blue 2″ squares. When all are sewn together they’ll create the center of this quilt block.)
• White: Cut EIGHT (8) 3 1/2″ squares. (These are paired with the Dk. Blue 2 3/8″ squares, which will create EIGHT (8) Snowball Corners, as needed to sew this quilt block together.)

Star in a Star Variation Quilt Block Diagram

Star in a Star Variation Quilt

If you sew TWELVE (12) “Star in a Star Variation Quilt Blocks” you’ll end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.

Free Trade Star Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Red: Cut ONE (1) 3 7/8″ square. (This is paired with the White 3 7/8″ square which will create TWO (2) Half-Square Triangles. Once they’re sewn together with the White  3 1/2″ squares they’ll create the center of this quilt block.)
• Red: Cut FOUR (4) 3 7/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. (These will flank the results of the White 7 1/4″ square, which will create FOUR (4) Flying Geese, as needed for this quilt block.)
• White: Cut TWO (2) 3 1/2″ squares. (These are paired with the TWO (2) HST’s & all together will create the center of this quilt block.)
• White: Cut FOUR (4) 3 1/2″ squares. (These are the FOUR (4) corners of this quilt block.)
• White: Cut ONE (1) 3 7/8″ square. On the back side of the square draw a diagonal line, corner-to-corner, ONE (1) time. (This is paired with the Red 3 7/8″ square which will create TWO (2) Half-Square Triangles. Once they’re sewn together with the White  3 1/2″ squares they’ll create the center of this quilt block.)
• White: Cut ONE (1) 7 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles. (These are flanked by the results of the Red 3 7/8″ squares, which will create FOUR (4) Flying Geese, as needed for this quilt block.)

Free Trade Star Quilt Block Diagram

Free Trade Star Quilt

If you make TWELVE (12) “Free Trade Star Quilt Blocks,” you’ll end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.

Free Trade Star Variation Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Blue: Cut TWO (2) 3 7/8″ squares. (These are paired with the White 3 7/8″ squares which will create FOUR (4) Half-Square Triangles. Once all FOUR (4) are sewn together they’ll create the center of this quilt block.)
• Blue: Cut FOUR (4) 3 7/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. (These will flank the results of the White 7 1/4″ square, which will create FOUR (4) Flying Geese, as needed for this quilt block.)
• White: Cut FOUR (4) 3 1/2″ squares. (These are the FOUR (4) corners of this quilt block.)
• White: Cut TWO (2) 3 7/8″ squares. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time. (These are paired with the Blue 3 7/8″ square which will create TWO (2) Half-Square Triangles. Once all FOUR (4) are sewn together they’ll create the center of this quilt block.)
• White: Cut ONE (1) 7 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles. (These are flanked by the results of the Blue
  3 7/8″ squares, which will create FOUR (4) Flying Geese, as needed for this quilt block.)

Free Trade Star Variation Quilt Block Diagram

Free Trade Star Variation Quilt

If you make TWELVE (12) “Free Trade Star Variation Quilt Blocks,” you’ll end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.

Stars & Triangles Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Red: Cut ONE (1) 2 1/2″ square. (This is the center of this quilt block. It’s flanked by the results of the White 3 1/4″ square which will create ONE (1) Square in a Square.)
• Red: Cut TWO (2) 2 7/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. (These will flank the results of the White 3 1/4″ squares, which will create ONE (1) Square in a Square, as needed for this quilt block.)
• Red: Cut TWO (2) 2 7/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. (These will be flanked by the results of the White 3 1/4″ squares, which will create FOUR (4) Flying Geese, as needed for this quilt block.)
• Purple: Cut TWO (2) 2 7/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. (These are flanked by the results of the White 3 1/4″ squares, which will create FOUR (4) Flying Geese, as needed for this quilt block.)
• Purple: Cut ONE (1) 3 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles. (These are flanked by the results of the Lilac
  2 1/4″ squares. They’re also flanked by the Lilac 1 1/4″ x 1 7/8″ rectangles & by the Lilac 1 1/4″ x 2 5/8″ rectangles. All are needed for this quilt block.)
• Purple: Cut TWO (2) 2 1/4″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles per square. (These are paired with the Lilac 1 1/4″ x 1 7/8″ rectangles & they’re also paired with the Lilac 1 1/4″ x 2 5/8″ rectangles. Then they’ll flank the results of the Purple 3 1/4″ square as needed for this quilt block.)
• Lilac: Cut FOUR (4) 2 1/2″ squares. (These are the FOUR (4) corners of this quilt block. They’re flanked by the results of the White 3 1/4″ squares.)
• Lilac: Cut FOUR (4) 3 1/4″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles per square. (These are paired with the Lilac 1/4″ x 1 7/8″ rectangles & they’re also paired with the Lilac 1 1/4″ x 2 5/8″ rectangles. Then they’ll flank the results of the Purple 3 1/4″ squares as needed for this quilt block.)
• Lilac: Cut FOUR (4) 1 1/4″ x 2 5/8″ rectangles. (These are paired with the results of the Lilac 3 1/4″ squares. & they’ll flank the results of the Purple 3 1/4″ square. All are needed for this quilt block.)
• Lilac: Cut FOUR (4) 1 1/4″ x 2 5/8″ rectangles. (These are paired with the results of the Lilac 3 1/4″ squares. & they’ll flank the results of the Purple 3 1/4″ square. All are needed for this quilt block.)
• White: Cut ONE (1) 3 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles. (These will flank the Red 2 1/2″ square which will create ONE (1) Square in a Square. They’ll also help create the center of this quilt block.)
• White: Cut TWO (2) 3 1/4″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles per square. (These will flank the Lilac 2 1/2″ squares in the corners as needed for this quilt block.)
• White: Cut TWO (2) 3 1/4″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles per square. (These will flank the results of the Red 2 7/8″ squares, which will create FOUR (4) Flying Geese, as needed for this quilt block.)
• White: Cut TWO (2) 3 1/4″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles per square. (These will flank the results of the Purple 2 7/8″ squares, which will create FOUR (4) Flying Geese, as needed for this quilt block.)
• White: Cut TWO (2) 3 1/4″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles per square. (These are paired with the Lilac
  1 1/4″ x 2 5/8″ rectangles & they’re also paired with the Lilac 1 1/4″ x 2 5/8″ rectangles. Then they’ll flank the results of the Purple 3 1/4″ squares as needed for this quilt block.)
• White: Cut FOUR (4) 1 7/8″ x 3 3/8″ rectangles. (These are paired with the results of the White 3 1/4″ squares. Then they’ll be flanked by the Lilac 1 1/4″ x 2 5/8″ rectangles & they’ll also be flanked by the Lilac 1 1/4″ x 2 5/8″ rectangles. All are needed for this quilt block.)
• White: Cut FOUR (4) 1 7/8″ x 4 3/4″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles per square. (These are paired with the results of the White 3 1/4″ squares. Then they’ll be flanked by the Lilac 1 1/4″ x 2 5/8″ rectangles & they’ll also be flanked by the Lilac 1 1/4″ x 2 5/8″ rectangles. All are needed for this quilt block.)

Stars & Triangles Quilt Block Diagram

Stars & Triangles Quilt

If you make TWELVE (12) “Stars & Triangles Quilt Blocks,” you’ll end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.

Stars & Triangles Variation Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Teal: Cut ONE (1) 2 1/2″ square. (This is the center of this quilt block. It’s flanked by the results of the White 3 1/4″ squares which will create ONE (1) Square in a Square.)
• Teal: Cut TWO (2) 2 1/4″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles per square. (These are paired with the Teal 1 1/4″ x 1 7/8″ rectangles & they’re also paired with the Teal 1 1/4″ x 2 5/8″ rectangles. Then they’ll flank the results of the Blue 3 1/4″ square as needed for this quilt block.)
• Teal: Cut TWO (2) 2 7/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. (These will be flanked by the results of the White 3 1/4″ squares, which will create FOUR (4) Flying Geese, as needed for this quilt block.)
• Teal: Cut FOUR (4) 3 1/4″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles per square. (These are paired with the Teal 1/4″ x 1 7/8″ rectangles & they’re also paired with the Teal 1 1/4″ x 2 5/8″ rectangles. Then they’ll flank the results of the Blue 3 1/4″ squares as needed for this quilt block.)
• Blue: Cut TWO (2) 2 7/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. (These are flanked by the results of the White 3 1/4″ squares, which will create ONE (1) Square in a Square, as needed for this quilt block.)
• Blue: Cut TWO (2) 2 7/8″ squares. (These are paired with the White 2 7/8″ squares which will create FOUR (4) Half-Square Triangles. They’ll also be the FOUR (4) corners of this quilt block.)
• Lt. Blue: Cut TWO (2) 2 7/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. (These are flanked by the results of the White 3 1/4″ squares, which will create FOUR (4) Flying Geese, as needed for this quilt block.)
• Blue: Cut ONE (1) 3 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles. (These are flanked by the results of the Teal
  2 1/4″ squares. They’re also flanked by the Teal 1 1/4″ x 1 7/8″ rectangles & by the Teal 1 1/4″ x
  2 5/8″ rectangles. All are needed for this quilt block.)
• White: Cut ONE (1) 3 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles. (These will flank the Teal 2 1/2″ square which will create ONE (1) Square in a Square. They’ll also help create the center of this quilt block.)
• White: Cut TWO (2) 3 1/4″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles per square. (These will flank the Half-Square Triangles in the FOUR (4) corners of this quilt block.)
• White: Cut TWO (2) 3 1/4″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles per square. (These will flank the results of the Lt. Blue 2 7/8″ squares, which will create FOUR (4) Flying Geese, as needed for this quilt block.)
• White: Cut TWO (2) 3 1/4″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles per square. (These will flank the results of the Teal 2 7/8″ squares, which will create FOUR (4) Flying Geese, as needed for this quilt block.)
• White: Cut TWO (2) 3 1/4″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles per square. (These are paired with the Teal
  1 1/4″ x 2 5/8″ rectangles & they’re also paired with the Teal 1 1/4″ x 2 5/8″ rectangles. Then they’ll flank the results of the Blue 3 1/4″ squares as needed for this quilt block.)
• White: Cut TWO (2) 2 7/8″ squares. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time. (These are paired with the Blue 2 7/8″ squares which will create FOUR (4) Half-Square Triangles. They’ll also be the FOUR (4) corners of this quilt block.)
• White: Cut FOUR (4) 1 7/8″ x 3 3/8″ rectangles. (These are paired with the results of the White 3 1/4″ squares. Then they’ll be flanked by the Teal 1 1/4″ x 2 5/8″ rectangles & they’ll also be flanked by the Teal 1 1/4″ x 2 5/8″ rectangles. All are needed for this quilt block.)
• White: Cut FOUR (4) 1 7/8″ x 4 3/4″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles per square. (These are paired with the results of the White 3 1/4″ squares. Then they’ll be flanked by the Teal 1 1/4″ x 2 5/8″ rectangles & they’ll also be flanked by the Teal 1 1/4″ x 2 5/8″ rectangles. All are needed for this quilt block.)

Stars & Triangles Variation Quilt Block Diagram

Stars & Triangles Variation Quilt

If you make TWELVE (12) “Stars & Triangles Variation Quilt Blocks,” you’ll end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.