Lone Tree Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Green: Cut TWO (2) 1 7/8″ squares. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time. (These are paired with the Green 1 7/8″ x 7 5/8″ rectangle, which will create TWO (2) Snowball Corners, as needed for this quilt block.)
• Green: Cut FOUR (4) 2 7/8″ squares. (These are paired with the White 2 7/8″ squares which will create EIGHT (8) Half-Square Triangles. You only need SEVEN (7) of these Half-Square Triangles for this quilt block.)
• Green: Cut ONE (1) 2 7/8″ square. Then cut the square diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles. You only need ONE (1) of these triangles for this quilt block. ( This will flank the results of the Green 2 7/8″ squares as needed for this quilt block.)
• Green: Cut ONE (1) 6 7/8″ square. Then cut the square diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles. You only need ONE (1) of these triangles for this quilt block. (This is paired with the results of the White 6 7/8″ square as needed for this quilt block.)
• Green: Cut ONE (1) 4 7/8″ square. Then cut the square diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles. (These are paired with the results of the Green
  2 7/8″ squares as needed for this quilt block.)
• Green: Cut ONE (1) 1 7/8″ x 7 5/8″ rectangle. (This is paired with the Green 1 7/8″ squares, which will create TWO (2) Snowball Corners, as needed for this quilt block.)
• White: Cut FOUR (4) 2 7/8″ squares. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time. (These are paired with the Green 2 7/8″ squares which will create EIGHT (8) Half-Square Triangles. You only need SEVEN (7) of these Half-Square Triangles for this quilt block.)
• White: Cut TWO (2) 2 7/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. (These will flank the results of the Green 2 7/8″ squares as needed for this quilt block.)
• White: Cut ONE (1) 5 7/8″ square. Then cut the square diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles. These are paired with the Green 1 7/8″ x 7 5/8″ rectangle as needed for this quilt block.)
• White: Cut ONE (1) 6 7/8″ square. Then cut the square diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles. (These are paired with the results of the Green 6 7/8″ square as needed for this quilt block.)

Lone Tree Quilt Block Diagram

Lone Tree Quilt

If you make TWELVE (12) “Lone Tree Quilt Blocks,” you’ll end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.

The Windmill Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Blue: Cut FOUR (4) 4 1/2″ squares. (These are flanked on THREE (3) sides by either the results of the Lt. Blue 2 7/8″ squares, or the White 2 7/8″, as needed for this quilt block.)
• Lt. Blue: Cut TEN (10) 2 7/8″ squares. (These are paired with the White 2 7/8″ which will create TWENTY Half-Square Triangles. FOUR (4) of these Half-Square Triangles are the FOUR (4) corner’s of this quilt block. The remaining ONE (1) Half-Square Triangle is the center of this quilt block.)
• White: Cut TEN (10) 2 7/8″ squares. (These are paired with the Lt. Blue 2 7/8″ which will create TWENTY Half-Square Triangles. FOUR (4) of these Half-Square Triangles are the FOUR (4) corner’s of this quilt block. The remaining ONE (1) Half-Square Triangle is the center of this quilt block.)

The Windmill Quilt Block Diagram

The Windmill Quilt

If you make TWELVE (12) “The Windmill Quilt Blocks,” you’ll end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.

Sailboat Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Tan: Cut ONE (1) 4 1/2″ square. On the back side of the square draw a diagonal line, corner-to-corner, ONE (1) time. (This is paired with the Blue 4 1/2″ square which will create TWO (2) Half-Square Triangles. You only need ONE (1) Half-Square Triangle for this quilt block.)
• Tan: Cut TWO (2) 2 7/8″ squares. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time. (These are paired with the Tan 2 1/2″ x 4 1/2″ rectangles, which will create TWO (2) Snowball Corners, as needed for this quilt block.)
• Tan: Cut TWO (2) 2 7/8″ squares. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time. (These are paired with the Tan 2 1/2″ x 8 1/2″ rectangles, which will create TWO (2) Snowball Corners, as needed for this quilt block.)
• Blue: Cut ONE (1) 4 1/2″ square. (This is paired with the Tan 4 1/2″ square which will create TWO (2) Half-Square Triangles. You only need ONE (1) Half-Square Triangle for this quilt block.)
• Blue: Cut ONE (1) 5 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles. (TWO (2) of these will flank the results of the Tan 4 1/2″ square & the other TWO (2) will flank the results of the Tan 2 7/8″ squares. As needed for this quilt block.)
• Blue: Cut ONE (1) 9 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles. You only need ONE (1) of these triangles for this quilt block. (This is flanked on both sides, by the results of the White 6 7/8″ squares, as needed for this quilt block.)
• White: Cut TWO (2) 6 7/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. (These are the FOUR (4) corners of this quilt block.)

Sailboat Quilt Block Diagram

Sailboat Quilt

If you make TWELVE (12) “Sailboat Quilt Blocks,” you will end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.