Nine Patch Star Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Green: Cut FOUR (4) 3″ squares. (These are paired with the White 3″ squares & will create ONE (1) Nine-Patch. They’ll also be the center of this quilt block.)
• Green: Cut FOUR (4) 3″ squares. (These are the FOUR (4) corner’s of this quilt block.)
• Green: Cut FOUR (4) 3 1/4″ squares. (These are paired with the White 3 1/4″ squares, which will create EIGHT (8) Half-Square Triangles, as needed for this quilt block.)
• White: Cut NINE (9) 3″ squares. (These are paired with the Green 3″ squares & will create ONE (1) Nine-Patch. They’ll also be the center of this quilt block.)
• White: Cut FOUR (4) 3 1/4″ squares. On the back side of each square draw a diagonal line, corner-to-corner, ONE (1) time. (These are paired with the Green 3 1/4″ squares, which will create EIGHT (8) Half-Square Triangles, as needed for this quilt block.)

Nine Patch Star Quilt Block Diagram

Nine Patch Star Quilt

If you make TWELVE (12) “Nine Patch Star Quilt Blocks,” you will end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.

Nine Patch Star Variation Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Salmon: Cut FOUR (4) 3″ squares. (These are paired with the White 3″ squares, which will create ONE (1) Nine-Patch. They’ll also be the center of this quilt block.)
• Salmon: Cut FOUR (4) 3″ squares. (These are the FOUR (4) corner’s of this quilt block.)
• Salmon: Cut FOUR (4) 3 1/4″ squares. (These are paired with the White 3 1/4″ squares, which will create EIGHT (8) Half-Square Triangles, as needed for this quilt block.)
• Salmon: Cut TWO (2) 3 3/4″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You will end up with FOUR (4) triangles. (These are paired with the results of the White 3 3/4″ squares, which will create FOUR (4) Quarter-Square Triangles, as needed for this quilt block.)
• White: Cut FIVE (5) 3″ squares. (These are paired with the Salmon 3″ squares, which will create ONE (1) Nine-Patch. They’ll also be the center of this quilt block.)
• White: Cut FOUR (4) 3 1/4″ squares. On the back side of each square draw a diagonal line, corner-to-corner, ONE (1) time. (These are paired with the Salmon 3 1/4″ squares, which will create EIGHT (8) Half-Square Triangles, as needed for this quilt block.)
• White: Cut TWO (2) 3 3/4″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You will end up with FOUR (4) triangles. (These are paired with the results of the Salmon 3 3/4″ squares, which will create FOUR (4) Quarter-Square Triangles, as needed for this quilt block.)

Nine Patch Star Variation Quilt Block Diagram

Nine Patch Star Variation Quilt

If you make TWELVE (12) “Nine Patch Star Variation Quilt Blocks,” you will end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.

Combination Star Quilt Block

Cutting Requirements for 12″ finished block (precise 1/4″ seam allowance):

• Blue: Cut ONE (1) 4 1/2″ square. (This will be the center of this quilt block.)
• Blue: Cut TWO (2) 5 1/4″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You will end up with FOUR (4) triangles per square. (These are paired with the White
  5 1/4″ squares, which will create FOUR (4) Quarter-Square Triangles, as needed for this quilt block.)
• Blue: Cut FOUR (4) 3 1/2″ squares. (These will be flanked by the results of the White 3″ squares, which will create FOUR (4) Square in a Square’s. They’ll also be the FOUR (4) corner’s of this quilt block.)
• White: Cut EIGHT (8) 3″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You will end up with TWO (2) triangles per square. (These will flank the Blue 3 1/2″ squares, which will create FOUR (4) Square in a Square’s. They’ll also be the FOUR (4) corner’s of this quilt block.)
• White: Cut TWO (2) 5 1/4″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You will end up with FOUR (4) triangles per square. (These are paired with the Blue
  5 1/4″ squares, which will create FOUR (4) Quarter-Square Triangles, as needed for this quilt block.)

Combination Star Quilt Block Diagram

Combination Star Quilt

If you make TWELVE (12) “Combination Star Quilt Blocks,” you will end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.

Combination Star Variation Quilt Block

Cutting Requirements for 12″ finished block (precise 1/4″ seam allowance):

• Purple: Cut TWO (2) 5 1/4″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You will end up with FOUR (4) triangles per square. (These are paired with the White 5 1/4″ squares, which will create FOUR (4) Quarter-Square Triangles, as needed for this quilt block.)
• Purple: Cut FIVE (5) 3 1/2″ squares. (These will be flanked by the results of the White 3″ squares, which will create FIVE (5) Square in a Square’s. FOUR (4) of them will be the FOUR (4) corner’s of this quilt block. The final ONE (1) will be the center of this quilt block.)
• White: Cut TEN (10) 3″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You will end up with TWO (2) triangles per square. (These will flank the Purple 3 1/2″ squares, which will create FIVE (5) Square in a Square’s. FOUR (4) of them will be the FOUR (4) corner’s of this quilt block. The final ONE (1) will be the center of this quilt block.)
• White: Cut TWO (2) 5 1/4″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You will end up with FOUR (4) triangles per square. (These are paired with the White 5 1/4″ squares, which will create FOUR (4) Quarter-Square Triangles, as needed for this quilt block.)

Combination Star Variation Quilt Block Diagram

Combination Star Variation Quilt

If you make TWELVE (12) “Combination Star Variation Quilt Blocks,” you will end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.

Bright Star Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Pink: Cut TWO (2) 3″ squares. (These are paired with the White 3″ squares, which will create FOUR (4) Half-Square Triangles, as needed for this quilt block.)
• Pink: Cut ONE 5″ square. Then cut the square diagonally, corner-to-corner, ONE (1) time. You will end up with TWO (2) triangles. (This is flanked by the results of the White 7″ square as needed for this quilt block.)
• Purple: Cut TWO (2) 3″ squares. (These are paired with the White 3″ squares, which will create FOUR (4) Half-Square Triangles, as needed for this quilt block.)
• Purple: Cut ONE 5″ square. Then cut the square diagonally, corner-to-corner, ONE (1) time. You will end up with TWO (2) triangles. (This is flanked by the results of the White 7″ square as needed for this quilt block.)
• White: Cut TWO (2) 3″ squares. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time. (These are paired with the Pink 3″ squares, which will create FOUR (4) Half-Square Triangles, as needed for this quilt block.)
• White: Cut TWO (2) 3″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You will end up with TWO (2) triangles per square. (These will be the FOUR (4) corner’s of this quilt block.)
• White: Cut TWO (2) 3″ squares. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time. (These are paired with the Purple 3″ squares, which will create FOUR (4) Half-Square Triangles, as needed for this quilt block.)
• White: Cut TWO (2) 7″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You will end up with TWO (2) triangles per square. (These are flanked by the results of the Pink 5″ squares & the results of the Purple 5″ squares, as needed for this quilt block.)

Bright Star Quilt Block Diagram

Bright Star Quilt

If you make TWELVE (12) “Bright Star Quilt Blocks,” you will end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.

Bright Star Variation Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Blue: Cut ONE (1) 7 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles. (These are paired with the results of the White 7 1/4″ squares as needed for this quilt block.)
• Aqua: Cut FOUR (4) 3″ squares. (These are paired with the White 3″ squares, which will create EIGHT (8) Half-Square Triangles, as needed for this quilt block.)
• Aqua: Cut TWO (2) 5″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You will end up with TWO (2) triangles per square. (These will be flanked by the results of the Blue 7 1/4″ squares as needed for this quilt block.)
• White: Cut FOUR (4) 3″ squares. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time. (These are paired with the Aqua 3″ squares, which will create EIGHT (8) Half-Square Triangles, as needed for this quilt block.)
• White: Cut TWO (2) 3″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You will end up with TWO (2) triangles per square. (These will be the FOUR (4) corner’s of this quilt block.)
• White: Cut ONE (1) 7 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles. (These are paired with the results of the Blue 7 1/4″ squares as needed for this quilt block.)

Bright Star Variation Quilt Block Diagram

Bright Star Variation Quilt

If you make TWELVE (12) “Bright Star Variation Quilt Blocks,” you will end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.