Lattice Star Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Blue: Cut SIX (6) 2 7/8″ squares. (These are paired with the White 2 7/8″ squares which will create TWELVE (12) Half-Square Triangles. FOUR (4) of these Half-Square Triangles will create the center of this quilt block.)
• Blue: Cut TWO (2) 2 7/8″ squares. (These are paired on TWO (2) sides, with the results of the Blue 2 7/8″ squares, as needed for this quilt block.)
• Blue: Cut FOUR (4) 2 7/8″ squares. (These will flank the results of the White 5 1/4″ squares, which will create FOUR (4) Flying Geese, as needed for this quilt block.)
• Blue: Cut ONE (1) 5 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles. (These will be paired with the results of the White 2 7/8″ squares on ONE (1) side & on ONE (1) other side they’ll be paired with the results of the White 4 7/8″ squares. As needed for this quilt block.)
• White: Cut SIX (6) 2 7/8″ squares. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time. (These are paired with the Blue 2 7/8″ squares which will create TWELVE (12) Half-Square Triangles. FOUR (4) of these Half-Square Triangles will create the center of this quilt block.)
• White: Cut TWO (2) 2 7/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. (These are paired with on ONE (1) side the results of the Blue 5 1/4″ square & one ONE (1) other side they’re paired with the results of the White 2 7/8″ squares. As needed for this quilt block.)
• White: Cut TWO (2) 4 7/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. (These are the FOUR (4) corners of this quilt block.)
• White: Cut ONE (1) 5 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles. (These are flanked by the results of the Blue
  2 7/8″ squares, which will create FOUR (4) Flying Geese, as needed for this quilt block.)

Lattice Star Quilt Block Diagram

Lattice Star Quilt

If you make TWELVE (12) “Lattice Star Quilt Blocks,” you’ll end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.

Lattice Star Variation Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Purple: Cut TWO (2) 2 1/2″ squares. (These are paired with the White 2 1/2″ squares which will create ONE (1) Four-Patch. They’ll also be the center of this quilt block.)
• Purple: Cut FOUR (4) 2 7/8″ squares. (These are paired with the White 2 7/8″ squares, which will create EIGHT (8) Half-Square Triangles, as needed for this quilt block.)
• Purple: Cut TWO (2) 2 7/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. (These are paired with the results of the Purple 2 7/8″ squares as needed for this quilt block.)
• Purple: Cut FOUR (4) 2 7/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. (These will flank the results of the White 5 1/4″ square, which will create FOUR (4) Flying Geese, as needed for this quilt block.)
• Purple: Cut ONE (1) 5 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles. (These are paired on ONE (1) side with the results of the White 2 7/8″ squares & on ONE (1) other side they’re paired with the results of the White 4 7/8″ squares. As needed for this quilt block.)
• White: Cut TWO (2) 2 1/2″ squares. (These are paired with the Purple 2 1/2″ squares which will create ONE (1) Four-Patch. They’ll also be the center of this quilt block.)
• White: Cut FOUR (4) 2 7/8″ squares. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time. (These are paired with the Purple 2 7/8″ squares, which will create EIGHT (8) Half-Square Triangles, as needed for this quilt block.)
• White: Cut TWO (2) 2 7/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. (These are paired with on ONE (1) side by the results of the White 2 7/8″ squares & on ONE (1) other side they’re paired with the results of the White 4 7/8″ squares. As needed for this quilt block.)
• White: Cut TWO (2) 4 7/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. (These are the FOUR (4) corners of this quilt block.)
• White: Cut ONE (1) 5 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles. (These are flanked by the results of the Purple
  2 7/8″ squares, which will create FOUR (4) Flying Geese, as needed for this quilt block.)

Lattice Star Variation Quilt Block Diagram

Lattice Star Variation Quilt

If you make TWELVE (12) “Lattice Star Variation Quilt Blocks,” you’ll end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.

Starburst Star Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Purple: Cut FOUR (4) 2″ x 3 1/2″ rectangles. (These will flank on all FOUR (4) sides, the Blue 3 1/2″ square, as needed for this quilt block.)
• Blue: Cut ONE (1) 3 1/2″ square. (This is the center of this quilt block. It’ll be flanked by the Purple 2″ x 3 1/2″ rectangles & by the results of the Lt. Blue 2 3/8″ squares as needed for this quilt block.)
• Blue: Cut SIX (6) 2 3/8″ squares. (These are paired with the Lt. Blue 2 3/8″ squares, which will create TWELVE (12) Half-Square Triangles, as needed for this quilt block.)
• Blue: Cut EIGHT (8) 2 3/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. (These will flank the results of the White 7 1/4″ square, which will create FOUR (4) Flying Geese, as needed for this quilt block.)
• Lt. Blue: Cut SIX (6) 2 3/8″ squares. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time. (These are paired with the Blue 2 3/8″ squares, which will create TWELVE (12) Half-Square Triangles, as needed for this quilt block.)
• White: Cut FOUR (4) 3 1/2″ squares. (These are the FOUR (4) corner’s of this quilt block.)
• White: Cut ONE (1) 7 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles. (These will be flanked by the results of the Blue
  2 3/8″ squares, which will create FOUR (4) Flying Geese, as needed for this quilt block.)

Starburst Star Quilt Block Diagram

Starburst Star Quilt

If you make TWELVE (12) “Starburst Star Quilt Blocks,” you will end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.

Starburst Star Variation Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Red: Cut ONE (1) 2 5/8″ square. (This is the center of this quilt block. It’s flanked by the results of the Lt. Pink 2 3/8″ squares, which will create ONE (1) Square in a Square, as needed for this quilt block.)
• Red: Cut FOUR (4) 2″ x 3 1/2″ rectangles. (These will flank the results of the Light Pink 2 3/8″ squares as needed for this quilt block.)
• Pink: Cut SIX (6) 2 3/8″ squares. (These are paired with the Lt. Pink 2 3/8″ squares, which will create TWELVE (12) Half-Square Triangles, as needed for this quilt block.)
• Pink: Cut EIGHT (8) 2 3/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. (These will flank the results of the White 7 1/4″ square, which will create FOUR (4) Flying Geese, as needed for this quilt block.)
• Lt. Pink: Cut TWO (2) 2 3/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. (These will flank the Red 2 5/8″ square, which will create ONE (1) Square in a Square, as needed for this quilt block.)
• Lt. Pink: Cut SIX (6) 2 3/8″ squares. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time. (These are paired with the Pink 2 3/8″ squares, which will create TWELVE (12) Half-Square Triangles, as needed for this quilt block.)
• White: Cut FOUR (4) 3 1/2″ squares. (These are the FOUR (4) corner’s of this quilt block.)
• White: Cut ONE (1) 7 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles. (These are flanked by the results of the Pink
  2 3/8″ squares, which will create FOUR (4) Flying Geese, as needed for this quilt block.)

Starburst Star Variation Quilt Block Diagram

Starburst Star Variation Quilt

If you make TWELVE (12) “Starburst Star Variation Quilt Blocks,” you will end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.

Maple Star Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Yellow: Cut FOUR (4) 2″ x 4 1/2″ rectangles. (These are flanked on TWO (2) ends by the Brown 2 1/2″ squares, which will create a “frame” around the Brown 4 1/2″ square, as needed for this quilt block.)
• Brown: Cut FOUR (4) 2 1/2″ squares. (These will flank on TWO (2) ends the Yellow 2″ x 4 1/2″ rectangles, which will create a “frame” around the Brown 4 1/2″ square, as needed for this quilt block.)
• Brown: Cut ONE (1) 4 1/2″ square. (This will be flanked, on all FOUR (4) sides, by the Yellow  2″ x 4 1/2″ rectangles. It’s also be the center of this quilt block.)
• Brown: Cut FOUR (4) 2 7/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. (These will flank the results of the White 5 1/4″ squares, which will create the FOUR (4) Flying Geese, as needed for this quilt block.)
• White: Cut FOUR (4) 2 1/2″ squares. (These are paired with the Brown 2 1/2″ squares on ONE (1) side & the White 2″ x 4 1/2″ rectangles on ONE (1) other side. As needed for this quilt block.)
• White: Cut FOUR (4) 2″ x 4 1/2″ rectangles. (These are the FOUR (4) corner’s of this quilt block.)
• White: Cut ONE (1) 5 1/4″ square. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles per square. (These are flanked by the results of the Brown 2 7/8″ squares, which will create FOUR (4) Flying Geese, as needed for this quilt block.)

Maple Star Quilt Block Diagram

Maple Star Quilt

If you make TWELVE (12) “Maple Star Quilt Blocks,” you will end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.

Maple Star Variation Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Gray: Cut ONE (1) 4 1/2″ square. (This is the center of this quilt block.)
• Gray: Cut FOUR (4) 2 7/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. (These will flank the results of the White 5 1/4″ square, which will create FOUR (4) Flying Geese, as needed for this quilt block.)
• Green: Cut FOUR (4) 2 1/2″ squares. (These are paired with the White 2 1/2″ squares & the White 2″ x 4 1/2″ rectangles. They’ll also help create the FOUR (4) corner’s of this quilt block.)
• Green: Cut FOUR (4) 2 7/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. (These will flank the results of the White 5 1/4″ square, which will create FOUR (4) Flying Geese, as needed for this quilt block.)
• White: Cut FOUR (4) 2 1/2″ squares. (These are paired with the Green 2 1/2″ squares & the White 2″ x 4 1/2″ rectangles. They’ll also help create the FOUR (4) corner’s of this quilt block.)
• White: Cut FOUR (4) 2″ x 4 1/2″ rectangles. (These will be used as the FOUR (4) corners as needed for this quilt block.)
• White: Cut ONE (1) 5 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles. (These are flanked by the results of the Gray
  2 7/8″ squares. which will create FOUR (4) Flying Geese, as for this quilt block.)
• White: Cut ONE (1) 5 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles. (These are flanked by the results of the Green
  2 7/8″ squares, which will create FOUR (4) Flying Geese, as needed for this quilt block.)

Maple Star Variation Quilt Block Diagram

Maple Star Variation Quilt

If you make TWELVE (12) “Maple Star Variation Quilt Blocks,” you will end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.