Centennial Star Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• • Red: Cut ONE (1) 6 1/2″ square. (This will be the center needed for this quilt block.)
  • Red: Cut TWO (2) 4 1/4″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles per square. (These are paired with the results of the Blue 4 1/4″ squares, which will create FOUR (4) Flying Geese, as needed for this quilt block.)
  • Blue: Cut TWO (2) 4 1/4″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles per square. (These are paired with the results of the Red 4 1/4″ squares, which will create FOUR (4) Flying Geese, as needed for this quilt block.)
  • White: Cut FOUR (4) 3 1/2″ squares. (These will be the FOUR (4) corner’s of this quilt block.)
  • White: Cut ONE (1) 7 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles. (These will be flanked by the results of the Red 4 1/4″ squares & the results of the Blue 4 1/4″ squares. Which will create FOUR (4) Flying Geese needed for this quilt block.)

Centennial Star Quilt Block Diagram

Centennial Star Quilt

If you make TWELVE (12) “Centennial Star Quilt Blocks,” you will end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.

Centennial Star Variation Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• • Blue: Cut ONE (1) 3 1/2″ square. (This is the center of the center of this quilt block. It’ll be flanked by the results of the Red 2 3/8″ squares.)
  • Blue: Cut TWO (2) 4 1/4″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles per square. (These are paired with the results of the Red 4 1/4″ squares, which will create FOUR (4) Flying Geese, as needed for this quilt block.)
  • Red: Cut TWO (2) 4 1/4″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles per square. (These are paired with the result’s of the Blue 4 1/4″ squares, which will create FOUR (4) Flying Geese, as needed for this quilt block.)
  • Red: Cut FOUR (4) 2 3/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. (These will flank the results of the White 4 1/4″ squares, which will create FOUR (4) Flying Geese, as needed for this quilt block.)
  • White: Cut FOUR (4) 3 1/2″ squares. (These are the FOUR (4) corner’s of this quilt block.)
  • White: Cut FOUR (4) 2″ squares. (These are the FOUR (4) corner’s of the inside star as needed for this quilt block. They’re flanked by the results of the Red 2 3/8″ squares.)
  • White: Cut ONE (1) 4 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles. (These are flanked by the the results of the Red 2 3/8″ squares, which will create FOUR (4) Flying Geese, as needed for this quilt block.)
  • White: Cut ONE (1) 7 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles. (These are flanked by the the results of the Blue 4 1/4″ squares & by the results of the Red 4 1/4″ squares. Which will create FOUR (4) Flying Geese as needed for this quilt block.)

Centennial Star Variation Quilt Block Diagram

Centennial Star Variation Quilt

If you make TWELVE (12) “Centennial Star Variation Quilt Blocks,” you will end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.

Waverly Star Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Red: Cut FOURTEEN (14) 2 3/8″ squares. (These are paired with the White 2 3/8″ squares, which will create TWENTY-EIGHT (28) Half-Square Triangles, as needed for this quilt block.)
• White: Cut FOURTEEN (14) 2 1/4″ squares. On the back side of each square draw a diagonal line, corner-to-corner, ONE (1) time. (These are paired with the Red 2 3/8″ squares, which will create TWENTY-EIGHT (28) Half-Square Triangles, as needed for this quilt block.)
• White: Cut TWO (2) 3 1/2″ x 5″ rectangles. (These are sewn into the upper part of this quilt block.)
• White: Cut TWO (2) 5″ x 6 1/2″ rectangles. (These are sewn into the lower part of this quilt block.)

Waverly Star Quilt Block Diagram

Waverly Star Quilt

If you make TWELVE (12) “Waverly Star Quilt Blocks,” you will end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.

Waverly Star Variation Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Blue: Cut ONE (1) 2″ square. (This is the center of the “Star” & is flanked by the results of the White 2 3/4″ quilt squares.)
• Blue: Cut FOURTEEN (14) 2 3/8″ squares. (These are paired with the White 2 3/8″ squares, to create TWENTY-EIGHT (28) Half-Square Triangles needed for this quilt block.)
• Gray: Cut TWO (2) 2 3/8″ squares. Then cut the square diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles per square. (These are paired with the results of the White 2 3/8″ squares, which will create FOUR (4) Quarter-Square Triangles, as needed for this quilt block.)
• White: Cut FOUR (4) 2″ squares. (These will flank the FOUR (4) corners of the Quarter-square Triangles.)
• White: Cut FOURTEEN (14) 2 3/8″ squares. On the back side of each square draw a diagonal line, corner-to-corner, ONE (1) time. (These are paired with the Blue 2 3/8″ squares, which will create TWENTY-EIGHT (28) Half-Square Triangles, as needed for this quilt block.)
• White: Cut TWO (2) 2 3/8″ squares. Then cut the square diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles per square. (These are paired with the results of the Gray 2 3/8″ squares, which will create FOUR (4) Quarter-Square Triangles, as needed for this quilt block.)
• White: Cut ONE (1) 2″ x 5″ rectangle. (This is flanked on one side by the results of the Blue
  2 3/8″ squares & on ONE (1) other side by the results of the White 2 3/8″ squares. It’s sewn into the upper part of this quilt block.)
• White: Cut TWO (2) 3″ x 5 1/2″ rectangles. (These are sewn into the lower part of this quilt block.)
• White: Cut ONE (1) 5″ x 6 1/2″ rectangle. (This is sewn into the right-hand side of this quilt block.)

Waverly Star Variation Quilt Block Diagram

Waverly Star Variation Quilt

If you make TWELVE (12) “Waverly Star Variation Quilt Blocks,” you will end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.

Solitaire Star Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Red: Cut FOUR (4) 3 7/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You’ll end up with TWO (2) triangles per square. (These will flank the results of the White 7 1/4″ squares,  which will create FOUR (4) Flying Geese, as needed for this quilt block.)
• Red: Cut TWO (2) 4 1/4″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles per square. (These are paired with the results of the White 4 1/4″ squares which will create FOUR (4) Quarter-Square Triangles. They’ll also help create the center of this quilt block.)
• White: Cut FOUR (4) 3 1/2″ squares. (These will the FOUR (4) corner’s of this quilt block.)
• White: Cut TWO (2) 4 1/4″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles per square. (These are paired with the results of the White 4 1/4″ squares which will create FOUR (4) Quarter-Square Triangles. They’ll also help create the center of this quilt block.)
• White: Cut ONE (1) 7 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles. (These will be flanked by the the results of the Red 3 7/8″ squares, which will create FOUR (4) Flying Geese, as needed for this quilt block.)

Solitaire Star Quilt Block Diagram

Solitaire Star Quilt

If you make TWELVE (12) “Solitaire Quilt Blocks,” you will end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.

Solitaire Star Variation Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Blue: Cut TWO (2) 4 1/2″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles per square. (These are paired with the results of the White 4 1/2″ squares which will create the FOUR (4) Quarter-Square Triangles. They’ll also help create the center of this quilt block.)
• Blue: Cut TWO (2) 4 1/2″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles per square. (These are paired with the results of the White 4 1/2″ squares. Then they’ll flank the results of the White 7 1/4″ square, which will create FOUR (4) Flying Geese as needed for this quilt block.)
• White: Cut FOUR (4) 3 1/2″ squares. (These will be the FOUR (4) corners of this quilt block.)
• White: Cut TWO (2) 4 1/2″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles per square. (These are paired with the results of the Blue 4 1/2″ squares which will create the FOUR (4) Quarter-Square Triangles. They’ll also help create the center of this quilt block.)
• White: Cut TWO (2) 4 1/2″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles per square. (These are paired with the results of the Blue 4 1/2″ squares. Then they’ll flank the results of the White 7 1/4″ square, which will create FOUR (4) Flying Geese as needed for this quilt block.)
• White: Cut ONE (1) 7 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You’ll end up with FOUR (4) triangles. (These are flanked by the the result’s of the Blue
  4 1/4″ squares & the White 4 1/4″ squares. Which will create FOUR (4) Flying Geese as needed for this quilt block.)

Solitaire Star Variation Quilt Block Diagram

Solitaire Star Variation Quilt

If you make TWELVE (12) “Solitaire Variation Quilt Blocks,” you will end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.