Woods Star Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Green: Cut FOUR (4) 2 3/4″ squares. (These will flank TWO (2) sides of the results of the Blue 3 1/4″ square and the White 3 1/4″ square, which will create EIGHT (8) Half-Square Triangles, as is needed for this quilt block.)
• Green: Cut TWO (2) 3 1/4″ squares. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time. (These will be paired with the White 3 1/4″ squares to create FOUR (4) Half-Square Triangles, which will also be the FOUR (4) corners, of this quilt block.)
• Blue: Cut ONE (1) 3 3/4″ square. (This will be the center of this quilt block.)
• Blue: Cut FOUR (4) 3 1/4″ squares. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time. (These will be paired with the White 3 1/4″ squares to create EIGHT (8) Half-Square Triangles as is needed for this quilt block.)
• Blue: Cut ONE (1) 3 1/2″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You will end up with FOUR (4) triangles. (These will be paired, on both sides, with the results of the White 3 1/2″ squares as is needed for this quilt block.)
• White: Cut FOUR (4) 2 3/4″ squares. (These will flank TWO (2) sides of the results of the Blue 3 1/4″ square and the White 3 1/4″ square, which will create EIGHT (8) Half-Square Triangles, as is needed for this quilt block.)
• White: Cut TWO (2) 3 1/4″ squares. (These will be paired with the Green 3 1/4″ squares to create EIGHT (8) Half-Square Triangles, which will also be the FOUR (4) corners, of this quilt block.)
• White: Cut FOUR (4) 3 1/4″ squares. (These will be paired with the Blue 3 1/4″ squares to create FOUR (4) Half-Square Triangles as is needed for this quilt block.)
• White: Cut TWO (2) 3 1/2″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You will end up with FOUR (4) triangles per square. (These will be paired with, on both sides, the results of the Blue 3 1/2″ square as is needed for this quilt block.)

Woods Star Quilt Block Diagram

Woods Star Quilt

If you make TWELVE (12) “Woods Star Quilt Blocks,” you will end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.

Woods Star Variation Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Yellow: Cut EIGHT (8) 2 3/4″ squares. (These will each flank the results of the Pink 3 1/4″ squares and the White 3 1/4″ squares, which will create EIGHT (8) Half-Square Triangles, as is needed for this quilt block.)
• Pink: Cut ONE (1) 3 3/4″ square. (This will be the center of this quilt block.)
• Pink: Cut FOUR (4) 3 1/4″ squares. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time. (These will be paired with the White 3 1/4″ squares to create EIGHT (8) Half-Square Triangles as is needed for this quilt block.)
• Pink: Cut ONE (1) 3 1/2″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You will end up with FOUR (4) triangles. (These will be paired, on both sides, with the results of the White 3 1/2″ squares as is needed for this quilt block.)
• White: Cut FOUR (4) 2 3/4″ squares. (These will flank TWO (2) sides of the results of the Pink 3 1/4″ square and the White 3 1/4″ square, which will create EIGHT (8) Half-Square Triangles, as is needed for this quilt block.)
• White: Cut FOUR (4) 3 1/4″ squares. (These will be paired with the Pink 3 1/4″ squares to create EIGHT (8) Half-Square Triangles as is needed for this quilt block.)
• White: Cut TWO (2) 3 1/2″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You will end up with FOUR (4) triangles per square. (These will be paired with, on both sides, the results of the Pink 3 1/2″ square as is needed for this quilt block.)

Woods Star Variation Quilt Block Diagram

Woods Star Variation Quilt

If you make TWELVE (12) “Woods Star Variation Quilt Blocks,” you will end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.

Pieced Star Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Yellow: Cut FOUR (4) 1 3/4″ squares. (These will be paired with the Orange 1 3/4″ squares, to create the Nine-Patch as well as the Square in a Square, needed for the center of this quilt block.)
• Yellow: Cut EIGHT (8) 2″ squares. (These will be paired with the Orange 2″ squares, to create the Four-Patch squares, for the four corners needed for this quilt block.)
• Yellow: Cut FOUR (4) 2″ x 3 1/2″ strips. (These will be flanked, on the left and right sides, by the results of the Yellow 2 1/4″ squares as is needed for this quilt block.)
• Yellow: Cut FOUR (4) 2 1/4″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You will end up with TWO (2) triangles per square. (These will flank the Yellow 2″ x 3 1/2″ strips as is needed for this quilt block.)
• Orange: Cut FIVE (5) 1 3/4″ squares. (These will be paired with the Yellow 1 3/4″ squares, to create the Nine-Patch as well as the Square in a Square, needed for the center of this quilt block.)
• Orange: Cut EIGHT (8) 2″ squares. (These will be paired with the Yellow 2″ squares, to create the Four-Patch squares, for the four corners needed for this quilt block.)
• Orange: Cut ONE (1) 4 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You will end up with FOUR (4) triangles per square. (These will flank the Yellow 2″ x 3 1/2″ strips as is needed for this quilt block.)
• White: Cut TWO (2) 3 3/4″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You will end up with TWO (2) triangles per square. (These triangles will flank the Nine-Patch in the center of the quilt to create the Square in a Square needed for this quilt block.)
• White: Cut FOUR (4) 3 3/4″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You will end up with TWO (2) triangles per square. (These will flank either the left or the right of the Four-Patch corners needed for this quilt block.)

Pieced Star Quilt Block Diagram

Pieced Star Quilt

If you make TWELVE (12) “Pieced Star Quilt Blocks,” you will end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.

Pieced Star Variation Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Blue: Cut FIVE (5) 1 3/4″ squares. (These will be paired with the Green 1 3/4″ squares, to create the Nine-Patch as well as the Square in a Square, needed for the center of this quilt block.)
• Blue: Cut FOUR (4) 3 1/2″ squares. (These will be the FOUR (4) corners of this quilt block.)
• Blue: Cut ONE (1) 4 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You will end up with FOUR (4) triangles per square. (These will flank the Green 2″ x 3 1/2″ strips as is needed for this quilt block.)
• Green: Cut FOUR (4) 1 3/4″ squares. (These will be paired with the Blue 1 3/4″ squares, to create the Nine-Patch as well as the Square in a Square, needed for the center of this quilt block.)
• Green: Cut FOUR (4) 2″ x 3 1/2″ strips. (These will be flanked, on the left and right sides, by the results of the Green 2 1/4″ squares as is needed for this quilt block.)
• Green: Cut FOUR (4) 2 1/4″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You will end up with TWO (2) triangles per square. (These will flank the Green 2″ x 3 1/2″ strips as is needed for this quilt block.)
• White: Cut TWO (2) 3 3/4″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You will end up with TWO (2) triangles per square. (These triangles will flank the Nine-Patch in the center of the quilt to create the Square in a Square needed for this quilt block.)
• White: Cut FOUR (4) 3 3/4″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You will end up with TWO (2) triangles per square. (These will flank either the left or the right of the Blue 3 1/2″ squares in the FOUR (4) corners needed for this quilt block.)

Pieced Star Variation Quilt Block Diagram

Pieced Star Variation Quilt

If you make TWELVE (12) “Pieced Star Variation Quilt Blocks,” you will end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.

Crown Star Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Blue: Cut FOUR (4) 2″ squares. (These will be used along with the White 2″ squares and the Blue 2″ x 3 1/2″ strips to create FOUR (4) Mini-Log Cabins at the centers of the FOUR (4) corners as needed for this quilt block.)
• Blue: Cut FOUR (4) 2″ x 3 1/2″ strips. (These will be used along with the White 2″ squares and the Blue 2 1/2″ squares to create FOUR (4) Mini-Log Cabins at the centers of the FOUR (4) corners as needed for this quilt block.)
• Green: Cut TWO (2) 4 1/4″ square. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You will end up with FOUR (4) triangles per square. (These will flank either the White 2″ squares and the Blue 2″ x 3 1/2″ strips or the White 2″ squares and the Blue 2″ squares of the FOUR (4) corners as needed for this quilt block.)
• Dark Pink: Cut ONE (1) 3 1/2″ square. (This will be the center of this quilt block.)
• Dark Pink: Cut TWO (2) 4 1/4″ square. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You will end up with FOUR (4) triangles per square. (These will flank the Blue 2″ x 3 1/2″ strips and the Blue 2″ squares of the FOUR (4) corners as needed for this quilt block.)
• White: Cut FOUR (4) 2″ squares. (These will be used along with the Blue 2″ squares and the Blue 2″ x 3 1/2″ strips to create FOUR (4) Mini-Log Cabins at the centers of the FOUR (4) corners as needed for this quilt block.)
• White: Cut SIX (6) 3 3/4″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You will end up with TWO (2) triangles per square. (These will be used to flank the results of the Green 4 1/4″ squares and the results of ONE (1) 0f the Dark Pink 4 1/4″ Squares as needed for the FOUR (4) corners as needed for this quilt block.)
• White: Cut ONE 4 1/4″ square. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You will end up with FOUR (4) triangles. (These will be used to flank the Dark Pink 3 1/2″ square to create the Square in a Square for the center of this quilt block.)

Crown Star Quilt Block Diagram

Crown Star Quilt

If you make TWELVE (12) “Crown Star Quilt Blocks,” you will end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.

Crown Star Variation Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Lime Green: Cut EIGHT (8) 2″ squares. (These will be paired with the Yellow 2″ squares and the White 2″ squares to create the FOUR (4) Four-Patch blocks at the centers of the FOUR (4) corner blocks as is needed for the FOUR (4) corners of this quilt block.)
• Purple: Cut ONE (1) 3 1/2″ square. (This will be flanked by the results of the White 3 3/4″ squares to create the Square in the Square as is needed for the center of this quilt block.)
• Purple: Cut TWO (2) 4 1/4″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You will end up with FOUR (4) triangles per square. (These will flank the Lime Green 2″ squares and the Yellow 2″ squares as well as the results of the White 4 1/4″ square as is needed for the FOUR (4) corners of this quilt block.)
• Yellow: Cut FOUR (4) 2″ squares. (These will be paired with the Yellow 2″ squares and the White 2″ squares to create the FOUR (4) Four-Patch blocks at the centers of the FOUR (4) corner blocks as is needed for the FOUR (4) corners of this quilt block.)
• Yellow: Cut TWO (2) 4 1/4″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You will end up with FOUR (4) triangles per square. (These will be used to flank the Lime Green 2″ squares and the White 2″ squares as well as the results of the White 3 3/4″ squares as is needed for the FOUR (4) corners of this quilt block.)
• White: Cut FOUR (4) 2″ squares. (These will be paired with the Yellow 2″ squares and the Lime Green 2″ squares to create the FOUR (4) Four-Patch blocks at the centers of the FOUR (4) corner blocks as is needed for the FOUR (4) corners of this quilt block.)
• White: Cut SIX (6) 3 3/4″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You will end up with TWO (2) triangles per square. (These will be used to flank the results of the Lime Green 2″ squares and the White 2″ squares as is  needed for the FOUR (4) corners as needed for this quilt block.)
• White: (These will be used to flank the Dark Pink 3 1/2″ square to create the Square in a Square for the center of this quilt block.)Cut ONE (1) 4 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You will end up with FOUR (4) triangles. (These will be used to flank the Purple 3 1/2″ square to create the Square in a Square for the center of this quilt block.)

Crown Star Variation Quilt Block Diagram

Crown Star Variation Quilt

If you make TWELVE (12) “Crown Star Variation Quilt Blocks,” you will end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.

Starry Cross Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Green: Cut FOUR (4) 2 1/2″ x 4 3/4″ strips. (These will be flanked on both sides by the results of the White 3 3/4″ squares to partially create the corners of this quilt block.)
• Ash Green: Cut FOUR (4) 2 1/2″ x 3 1/2″ strips. (These will be flanked on all FOUR (4) corners by the White 2 1/4″ squares to create FOUR (4) of the EIGHT (8) Snowball Corners needed for this quilt block.)
• Dark Green: Cut ONE (1) 2 1/2″ square. (These will be flanked on all FOUR (4) corners by the the White 2 1/4″ squares to create the Square in a Square at the center of this quilt as is needed for this quilt block.)
• Dark Green: Cut FOUR (4) 2 1/4″ squares. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time. (These will flank one end of the Green 2 1/2″ x 4 3/4″ strips to partially create one end of the Snowball Corners for the FOUR (4) corners of this quilt block.)
• White: Cut FOUR (4) 3 3/4″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You will end up with TWO (2) triangles per square. (These will flank both sides of the Green 2 1/2″ x 4 3/4″ strips to partially create the corners of this quilt block.)
• White: Cut FOUR (4) 2 1/4″ squares. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time. (These will flank the opposite end of the Green 2 1/2″ x 4 3/4″ strips to finish completing the Snowball Corners for the FOUR (4) corners of this quilt block.)
• White: Cut FOUR (4) 2 1/4″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You will end up with TWO (2) triangles per square. (These will flank the the results of the Dark Green 2 1/2″ square to create the Square in a Square needed for the center of this quilt block.)
• White: Cut SIXTEEN (16) 2 1/4″ squares. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time. (These will flank all four corners of the Ash Green 2 1/2″ x 3 1/2″ strips to create FOUR (4) of the EIGHT (8) Snowball Corners needed for this quilt block.)

Starry Cross Quilt Block Diagram

Starry Cross Quilt

If you make TWELVE (12) “Starry Cross Quilt Blocks,” you will end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.

Starry Cross Variation Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Light Gray: Cut FOUR (4) 2 1/2″ x 3 1/2″ strips. (These will be flanked on all FOUR (4) corners by the White 2 1/4″ squares to create FOUR (4) of the EIGHT (8) Snowball Corners needed for this quilt block.)
• Gray: Cut FOUR (4) 2 1/2″ squares. (These will be flanked on one end by the Medium Gray 2 1/2″ squares and the Gray 2 1/4″ squares on the other end to create FOUR (4) of the EIGHT (8) Snowball Corners needed for this quilt block.)
• Gray: Cut FOUR (4) 2 1/4″ squares. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time. (These will flank the ends of the Gray 2 1/2″ squares to partially create FOUR (4) of the EIGHT (8) Snowball Corners needed for this quilt block.)
• Dark Gray: Cut ONE (1) 2 1/4″ square. (These will be flanked on all FOUR (4) corners by the the White 2 1/4″ squares to create the Square in a Square at the center of this quilt as is needed for this quilt block.)
• Dark Gray: Cut FOUR (4) 2 1/2″ squares. (These will be flank the Medium Gray 2 1/2″ squares  FOUR (4) of the EIGHT (8) Snowball Corners needed for this quilt block.)
• White: Cut FOUR (4) 3 3/4″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You will end up with TWO (2) triangles per square. (These will flank both sides of the results of the Gray 2 1/2″ squares and the Medium Gray 2 1/2″ squares to create the FOUR (4) corners of this quilt block.)
• White: Cut FOUR (4) 2 1/4″ squares. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time. (These will flank the Dark Green 2 1/2″ square to create the Square in a Square at the center of this quilt as is needed for this quilt block.)
• White: Cut SIXTEEN (16) 2 1/4″ squares. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time. (These will flank all FOUR (4) corners of the Light Gray 2 1/2″ x 3 1/2″ strips to create FOUR (4) of the EIGHT (8) Snowball Corners needed for this quilt block.)

Starry Cross Variation Quilt Block Diagram

Starry Cross Variation Quilt

If you make TWELVE (12) “Starry Cross Quilt Blocks,” you will end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.

Georgetown Star Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Yellow: Cut FOUR (4) 3 1/2″ squares. (These will be the four corners of this quilt block.)
• Yellow: Cut TWO (2) 4 1/4″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You will end up with FOUR (4) triangles per square. (These will flank the results of ONE (1) of the White 4 1/4″ squares to create the lower and/or side portion of the star needed for this quilt block.)
• Green: Cut ONE (1) 4 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You will end up with FOUR (4) triangles. (These will flank the results of ONE (1) of the White 4 1/4″ squares to create the upper and/or inside portion of the star needed for this quilt block.)
• Purple: Cut TWO (2) 3 1/2″ squares. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time. (These will be paired with the White 3 1/2″ squares to create FOUR (4) Half-Square Triangles needed for this quilt block.)
• Purple: Cut ONE (1) 4 3/4″ square. (This will be the center of this quilt block as well as the center of the Square in a Square needed for this quilt block.)
• White: Cut TWO (2) 3 1/2″ squares. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time. (These will be paired with the Purple 3 1/4″ squares to create FOUR (4) Half-Square Triangles needed for this quilt block.)
• White: Cut TWO (2) 4 1/4″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You will end up with FOUR (4) triangles per square. (These will flank the results of ONE (1) of the White 4 1/4″ squares to create the upper and/or inside portion of the star needed for this quilt block.)
• White: Cut TWO (2) 3 3/4″ squares.Then cut the squares diagonally, corner-to-corner, ONE (1) time. You will end up with TWO (2) triangles per square. (These will flank the the results of the Purple 4 3/4″ squares to create the Square in a Square needed for the center of this quilt block.)

Georgetown Star Quilt Block Diagram

Georgetown Star Quilt

If you make TWELVE (12) “Georgetown Star Quilt Blocks,” you will end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.

Georgetown Star Variation Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Light Blue: Cut FOUR (4) 3 1/2″ squares. (These will the the FOUR (4) corners needed for this quilt block.)
• Light Blue: Cut TWO (2) 4 1/4″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You will end up with FOUR (4) triangles per square. (These will flank the results of ONE (1) of the Pink 4 1/4″ squares to create the lower and/or side portion of the star needed for this quilt block.)
• Peach: Cut ONE (1) 4 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You will end up with FOUR (4) triangles. (These will flank the White 3 1/2″ square to create the first Square in a Square needed for the center of this quilt block.)
• Peach: Cut TWO (2) 3 1/2″ squares. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time. (These will be paired with the White 3 1/2″ squares to create FOUR (4) Half-Square Triangles needed for this quilt block.)
• Pink: Cut TWO (2) 4 1/4″ squares. Then cut the squares diagonally, corner-to-corner, TWO (2) times. You will end up with FOUR (4) triangles per square. (These will flank the results of ONE (1) of the White 4 1/4″ squares to create the lower and/or side portion of the star needed for this quilt block.)
• Pink: Cut TWO (2) 3 3/4″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You will end up with TWO (2) triangles per square. (These will flank the the results of the Peach 3 1/2″ squares to create the second Square in a Square needed for the center of this quilt block.)
• White: Cut ONE (1) 3 1/2″ square. (This will be the center of this quilt block as well as the center of the first Square in a Square needed for this quilt block.)
• White: Cut TWO (2) 3 1/2″ squares. (These will be paired with the Peach 3 1/2″ squares to create FOUR (4) Half-Square Triangles needed for this quilt block.)
• White: Cut ONE (1) 4 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You will end up with FOUR (4) triangles. (These will flank the results of ONE (1) of the Pink 4 1/4″ squares to create the upper and/or inside portion of the star needed for this quilt block.)

Georgetown Star Variation Quilt Block Diagram

Georgetown Star Variation Quilt

If you make TWELVE (12) “Georgetown Star Variation Quilt Blocks,” you will end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.