Paul’s Star Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Sage Green: Cut ONE (1) 1 7/8″ square. (This will be flanked on all FOUR (4) sides, by the Chartreuse Green 1 7/8″ x 3 3/8″ rectangles. It will also be the center of this quilt block.)
• Sage Green: Cut ONE (1) 7 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You will end up with FOUR (4) triangles. (These will be flanked by the results of the White 3 7/8″ squares, which will create FOUR (4) Flying Geese, as needed for this quilt block.)
• Chartreuse Green: Cut FOUR (4) 3 1/2″ squares. (These will be flanked by the results of the White 3 7/8″ squares. They will also be the FOUR (4) corner’s of this quilt block.)
• Chartreuse Green: Cut FOUR (4) 1 7/8″ squares. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time. (These will flank the Chartreuse Green 1 7/8″ x
  3 3/8″ rectangles, which will create FOUR (4) Snowball Corner’s, as needed for this quilt block.
• Chartreuse Green: Cut FOUR (4) 1 7/8″ x 3 3/8″ rectangles. (These will be flanked on ONE (1) end by the results of the Chartreuse Green 1 7/8″ squares & on the opposite end by the Sage Green 1 7/8″ square, as needed for this quilt block.)
• White: Cut TWO (2) 3 7/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You will end up with TWO (2) triangles per square. (These will flank on TWO (2) sides the results of the Chartreuse Green 1 7/8″ x 3 3/8″ rectangles & on the other side by the results of the Sage Green 1 7/8″ x 3 3/8″ rectangles, as needed for this quilt block.)
• White: Cut ONE (1) 5 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You will end up with FOUR (4) triangles. (These will be flanked by the results of the results of the Sage Green 7 1/4″ square, which will create FOUR (4) Flying Geese, as needed for this quilt block.)

Paul’s Star Quilt Block Diagram

Paul’s Star Quilt

If you make TWELVE (12) “Paul’s Star Quilt Blocks,” you will end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.

Luke’s Star Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Rust: Cut ONE (1) 3 1/2″ square. (This will be flanked by the results of the Rust 2 3/8″ squares. It will also be the center of this quilt block.)
• Rust: Cut FOUR (4) 2 3/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You will end up with TWO (2) triangles per square. (These will flank the Rust 3 1/2″ square on ONE (1) side. And on other side the results of the Yellow 4 1/4″ squares, which will create FOUR (4) Flying Geese, as needed for this quilt block.)
• Rust: Cut FOUR 2 3/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You will end up with TWO (2) triangles per square. (These will flank on ONE (1) side the White 1 1/2″ x 7 5/8″ rectangles & the Yellow 2″ squares on another side, as needed for this quilt block.)
• Yellow: Cut EIGHT (8) 2″ squares. (These will flank the results of the Rust 2 3/8″ squares on ONE (1) side & the Yellow 3 1/2″ squares on the other side, as needed for this quilt block.)
• Yellow: Cut FOUR (4) 3 1/2″ squares. (These will flank the results of the Yellow 2″ squares & they will also be the FOUR (4) corner’s of this quilt block.)
• Yellow: Cut TWO (2) 2 3/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You will end up with TWO (2) triangles per square. (These will flank the results of the Rust 2 3/8″ squares on ONE (1) side & the White 1 1/2″ x 7 5/8″ rectangles on the other side, as needed for this quilt block.)
• Yellow: Cut EIGHT (8) 2 3/8″ squares. On the back side of the squares draw a diagonal line, corner-to-corner, ONE (1) time. (These are paired with the results of the White 1 1/2″ x 7 5/8″ rectangles, which will create EIGHT (8) Snowball Corner’s for this quilt block.)
• Yellow: Cut ONE (1) 4 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You will end up with FOUR (4) triangles. (These are paired with the results of the Rust 2 3/8″ squares, which will create FOUR (4) Flying Geese, as needed for this quilt block.)
• Yellow: Cut ONE (1) 4 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You will end up with FOUR (4) triangles. (These will flank the results of the other Yellow 4 1/4″ square on ONE (1) side & the White 1 1/2″ x 7 5/8″ on TWO (2) other sides, as needed for this quilt block.)
• White: Cut FOUR (4) 1 1/2″ x 7 5/8″ rectangles. (These are paired with the Yellow 2 3/8″ squares which will create EIGHT (8) Snowball Corner’s for this quilt block. They will be also be flanked on TWO (2) sides by the results of the Yellow 4 1/4″ square & the results of the Yellow 2 3/8″ squares.  On the remaining side, they will be flanked by the Rust 2 3/8″ squares, as needed for this quilt block.

Luke’s Star Quilt Block Diagram

Luke’s Star Quilt

If you make TWELVE (12) “Luke’s Star Quilt Blocks,” you will end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.

John’s Star Quilt Block

Cutting Requirements for 12″ finished block (scant 1/4″ seam allowance):

• Mint Green: Cut FOUR (4) 3 7/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You will end up with TWO (2) triangles per square. (These will flank the White 4 3/4″ squares. Which will create TWO (2) Square in a Squares.)
• Mint Green: Cut ONE (1) 7 1/4″ square. Then cut the square diagonally, corner-to-corner, TWO (2) times. You will end up with FOUR (4) triangles. (These will be flanked by the White
  3 7/8″ squares. Which will create FOUR (4) Flying Geese.)
• White: Cut TWO (2) 4 3/4″ squares. (These will be flanked by the results of the Mint Green
  3 7/8″ squares. Which will create TWO (2) Square in a Squares.)
• White: Cut FOUR (4) 3 7/8″ squares. Then cut the squares diagonally, corner-to-corner, ONE (1) time. You will end up with TWO (2) triangles per square. (These will flank the results of the Mint Green 7 1/4″ square. Which will create FOUR (4) Flying Geese.)

John’s Star Quilt Block Diagram

John’s Star Quilt

If you make TWELVE (12) “John’s Star Quilt Blocks,” you will end up with the quilt top pictured above. The size will be 36″ x 48″ finished, 36 1/2″ x 48 1/2″ unfinished.